DV Info Net

DV Info Net (http://www.dvinfo.net/forum/)
-   Panasonic P2HD / DVCPRO HD Camcorders (http://www.dvinfo.net/forum/panasonic-p2hd-dvcpro-hd-camcorders/)
-   -   IDX mount for HPX-371 (http://www.dvinfo.net/forum/panasonic-p2hd-dvcpro-hd-camcorders/484105-idx-mount-hpx-371-a.html)

Ed Dooley August 31st, 2010 02:02 PM

IDX mount for HPX-371
 
Buying the 370 and the sales rep wants me to buy a 3 pin battery mount to IDX v-mount. I'd like to just swap out the Anton Bauer mount and not have an additional .5 pound adapter in between. Is it easy?
The Panasonic literature just says I need the V-mount if I want to use IDX, so I'm assuming it's a fairly straight-forward swap?
Ed

Dan Brockett August 31st, 2010 03:39 PM

I have never done the swap on a 370 but typically it is just 3-4 screws and a couple of wires. Should not be too difficult.

Dan

Steve Phillipps August 31st, 2010 04:00 PM

Extremely easy, your dealer should be able to do it.
Steve

Ed Dooley August 31st, 2010 08:54 PM

Thanks, I'll get them to do it.
Ed

John Twigt September 1st, 2010 12:58 AM

Yeah, best choice is to replace the plate on the camera, adaptors always introduce extra connections and thus extra weight and possibility to failure, I would get this one from switronix (has an extra powertap outlet) and it's just four screws and two wires (if it's similar to replacing the AB mount on the HPX500, which I did).

Good luck

Gary Nattrass September 1st, 2010 02:15 AM

I got an IDX V-mount plate on my 301 and it works great, four screws and its on but I got mine fitted by my dealer.


All times are GMT -6. The time now is 11:16 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2018 The Digital Video Information Network