Private Classifieds listings from 2003

E-Gene Soh · February 3rd, 2003, 12:44 PM

I'm looking for a 2nd hand Sennheiser ME66 with the K6(phantom and battery).

Please email me with the condition of the mic and how much you want for it inclusive of postage charges to Australia. If you are located in Australia, please email me your price in AUD.

Thanks and I look forward to hearing from you.

Derrick Begin · February 3rd, 2003, 12:59 PM

E-Gene,

Check out WWW.BHPHOTO.COM, I bought my used mike there (Sennheiser ME66/K6) and it is superb.

Cheers!

Derrick

Christopher Go · February 3rd, 2003, 08:59 PM

I have two sets of unopened Panasonic 'Professional' series AY-DVM63PQ MiniDV tapes. Each box contains 5 individually wrapped and sealed tapes in plastic cases. The boxes themselves are unopened. Presently they are stored in a clean drawer where I keep the remainder of my media.

I'd like to sell each box for $20.00. They are small so I don't expect the shipping to be very much, well under $5.00 that's for sure, probably closer to $2.50 anywhere in the USA. Will definitely verify any shipping costs prior to sending it out of course.

I'm selling these because I am using AY-DVM63MQ 'Master' series tapes instead.

Of course, feel free to email me if you have any questions or if you think the price is too high. I accept Paypal but I'm open for other options, just let me know.

Chris Hurd · February 3rd, 2003, 09:06 PM

The price is not out of line. Our sponsor, Pro-Tape www.pro-tape.com sells the Pana 63PQ at a regular price of $5.96 each.

Congratulations on your move up to the MQ series. Hurray for the little white box.

Frank Wright · February 4th, 2003, 06:21 PM

Is this tripod still available? I'm looking for one for a start-up set w/ a XL1s.

Frank Wright
Neophyte

E-Gene Soh · February 5th, 2003, 11:20 AM

I've checked Bhphoto but there aren't any available. Any suggestions for another shotgun mic that I can get for my PD150?

Christopher Go · February 5th, 2003, 05:09 PM

Thanks, Chris. The MQs are distinct looking tapes, but then again I haven't seen too many MiniDV tapes to compare them with. Now to get some good footage for these...

Mike Rehmus · February 5th, 2003, 06:10 PM

AT 835B is a good ENG shotgun and quite a bit less expensive. I think it is more rugged than the Sennheiser and level-wise, is a better match.

In fact, if you purchase a standard ME66 with K6, you will have to either use an attenuator in the output or send the K6 to Sennheiser for modification to lower the output levels.

Victor Muh · February 6th, 2003, 11:34 AM

Is your XL1 PAL still for sale?

Dan Holly · February 6th, 2003, 12:19 PM

I never made it to ebay with this belt, so I'll update and keep it posted here for a while longer, and will entertain "offers".

Jean King · February 7th, 2003, 11:57 AM

Hello! I am also I'm looking for a used jib for my upcoming project March 2nd. I would consider purchasing a second hand one, too. Ideas, anyone??

Jean

Mike Rehmus · February 7th, 2003, 05:44 PM

Because every jib (and there are a lot out there) have differing specs, it would be useful if you could also post the physical characteristics you require so we would know the performance you need rather than the brand.

Just a thought and not a rock. :-)))

Zac Stein · February 7th, 2003, 06:01 PM

Chris, while you're at it, could you swing past melbourne on your way back from Japan, would be much appreciated.

Cheers.

Zac

Jean King · February 7th, 2003, 08:30 PM

I'm looking to use a jib mostly for indoor work, and would like one with the flexibility of a reach between 5 - 10 feet. I am planning on using it with a GL2.

Chris Hurd · February 7th, 2003, 09:06 PM

Hi Jean,

Please see:

http://www.dvinfo.net/articles/camsu...skycranejr.php
http://www.dvinfo.net/articles/camsupport/skycrane.php

February 3rd, 2003, 12:44 PM	#61
E-Gene Soh New Boot Join Date: Jan 2003 Location: Melbourne, Australia Posts: 21	WTB: Sennheiser ME66 w K6 power I'm looking for a 2nd hand Sennheiser ME66 with the K6(phantom and battery). Please email me with the condition of the mic and how much you want for it inclusive of postage charges to Australia. If you are located in Australia, please email me your price in AUD. Thanks and I look forward to hearing from you. __________________ regards, E-Gene Soh "In the land of the blind, the one-eyed man is king"

February 3rd, 2003, 08:59 PM	#63
Christopher Go Major Player Join Date: Nov 2002 Location: Honolulu, HI Posts: 429	Panasonic AY-DVM63PQ Tapes I have two sets of unopened Panasonic 'Professional' series AY-DVM63PQ MiniDV tapes. Each box contains 5 individually wrapped and sealed tapes in plastic cases. The boxes themselves are unopened. Presently they are stored in a clean drawer where I keep the remainder of my media. I'd like to sell each box for $20.00. They are small so I don't expect the shipping to be very much, well under $5.00 that's for sure, probably closer to $2.50 anywhere in the USA. Will definitely verify any shipping costs prior to sending it out of course. I'm selling these because I am using AY-DVM63MQ 'Master' series tapes instead. Of course, feel free to email me if you have any questions or if you think the price is too high. I accept Paypal but I'm open for other options, just let me know.

February 3rd, 2003, 09:06 PM	#64
Chris Hurd Obstreperous Rex Join Date: Jan 2001 Location: San Marcos, TX Posts: 27,366 Images: 513	The price is not out of line. Our sponsor, Pro-Tape www.pro-tape.com sells the Pana 63PQ at a regular price of $5.96 each. Congratulations on your move up to the MQ series. Hurray for the little white box. __________________ CH Search DV Info Net \| 20 years of DVi \| ...Tuesday is Soylent Green Day!

February 5th, 2003, 11:20 AM	#66
E-Gene Soh New Boot Join Date: Jan 2003 Location: Melbourne, Australia Posts: 21	I've checked Bhphoto but there aren't any available. Any suggestions for another shotgun mic that I can get for my PD150? __________________ regards, E-Gene Soh "In the land of the blind, the one-eyed man is king"

February 5th, 2003, 06:10 PM	#68
Mike Rehmus Wrangler Join Date: May 2002 Location: Vallejo, California Posts: 4,049	AT 835B is a good ENG shotgun and quite a bit less expensive. I think it is more rugged than the Sennheiser and level-wise, is a better match. In fact, if you purchase a standard ME66 with K6, you will have to either use an attenuator in the output or send the K6 to Sennheiser for modification to lower the output levels. __________________ Mike Rehmus Hey, I can see the carrot at the end of the tunnel!

February 3rd, 2003, 12:59 PM	#62
Derrick Begin Major Player Join Date: Jun 2002 Location: New York Posts: 329	E-Gene, Check out WWW.BHPHOTO.COM, I bought my used mike there (Sennheiser ME66/K6) and it is superb. Cheers! Derrick

February 4th, 2003, 06:21 PM	#65
Frank Wright New Boot Join Date: Jan 2003 Location: Cleveland, OH Posts: 5	Is this tripod still available? I'm looking for one for a start-up set w/ a XL1s. Frank Wright Neophyte

February 5th, 2003, 05:09 PM	#67
Christopher Go Major Player Join Date: Nov 2002 Location: Honolulu, HI Posts: 429	Thanks, Chris. The MQs are distinct looking tapes, but then again I haven't seen too many MiniDV tapes to compare them with. Now to get some good footage for these...

February 6th, 2003, 11:34 AM	#69
Victor Muh Regular Crew Join Date: Aug 2002 Location: Paris, France Posts: 126	Is your XL1 PAL still for sale? __________________ Strive not to be a success, but rather to be of value. - Albert Einstein http://advaloreminternational.com

February 6th, 2003, 12:19 PM	#70
Dan Holly Major Player Join Date: Jul 2002 Location: Anchorage, Alaska Posts: 336	I'll leave this up for a while longer I never made it to ebay with this belt, so I'll update and keep it posted here for a while longer, and will entertain "offers". __________________ Dan Holly Anchorage, Alaska

February 7th, 2003, 11:57 AM	#71
Jean King Regular Crew Join Date: Nov 2002 Location: Atlanta, GA Posts: 45	Used jib Hello! I am also I'm looking for a used jib for my upcoming project March 2nd. I would consider purchasing a second hand one, too. Ideas, anyone?? Jean

February 7th, 2003, 05:44 PM	#72
Mike Rehmus Wrangler Join Date: May 2002 Location: Vallejo, California Posts: 4,049	Because every jib (and there are a lot out there) have differing specs, it would be useful if you could also post the physical characteristics you require so we would know the performance you need rather than the brand. Just a thought and not a rock. :-))) __________________ Mike Rehmus Hey, I can see the carrot at the end of the tunnel!

February 7th, 2003, 06:01 PM	#73
Zac Stein Major Player Join Date: Aug 2002 Location: Melbourne, Australia Posts: 730	Chris, while you're at it, could you swing past melbourne on your way back from Japan, would be much appreciated. Cheers. Zac

February 7th, 2003, 08:30 PM	#74
Jean King Regular Crew Join Date: Nov 2002 Location: Atlanta, GA Posts: 45	Jib Specs I'm looking to use a jib mostly for indoor work, and would like one with the flexibility of a reach between 5 - 10 feet. I am planning on using it with a GL2.

February 7th, 2003, 09:06 PM	#75
Chris Hurd Obstreperous Rex Join Date: Jan 2001 Location: San Marcos, TX Posts: 27,366 Images: 513	Hi Jean, Please see: http://www.dvinfo.net/articles/camsu...skycranejr.php http://www.dvinfo.net/articles/camsupport/skycrane.php __________________ CH Search DV Info Net \| 20 years of DVi \| ...Tuesday is Soylent Green Day!