Private Classifieds listings from 2008

[Rad Sinyak]

I couldn't use it on my tripod at all. Partly because I don't have a good tripod. I ended up getting a clamping workstand at a hardware store for $30 and using it as a base for the slider.

[Mary Luoto]

Kata backpack, Shotgun mic, Camera lights and Headphones - Thanks Mary

Originally Posted by Mary Luoto

If you are on market for these items you cannot find them in a better care and condition, they are nearly new items.
I have been using them only a few times on my canon XL1 and XL2 comcoders.
The reason for selling is that I have no use for them any more.
I have bought all items from b&hphotovideo n.y.


Canon extender XL 1.6x. , for XL-1 and XL1s DV comcoders. This device will shift the focal length of master lens to telephoto side by 1.6 times. Asking 200.00 usd
Lists in b&h 389.95 usd

Canon zoom lens EF 75-300mm f/4-5.6 IS. This lens has a image stabilizer and manual/auto focus.
Lists in amazon.com 515.00 usd. Asking 300.00 usd

Shotgun microphone AT897, operates on battery or phantom power, comes in original box. Lists in b&h 269.00 usd. Asking 150.00 usd

Stennheiser headphones , HD 25-1, closed , dynamic headphone for audio sources which must be monitored at high volume. Never used.
Lists in b&h 199.99 usd. Asking 100.00 usd

Mick Power IIb, Dual 48Volt Phantom Power Supply, PB224 made by Rolls.
Never used. Lists in b&h 66.50 usd. Asking 30.00 usd

Camera light, Bescor MPL-645 with dimmer and barn doors, including battery and battery charger, output of the light is 50W.
Listed in b&h 364.95 usd. Asking 200.00 usd

Camera backback KATA BP-502 for XL1-XL2 or other similar comcoders, it is very clean , some short interior deviders are missing, excelent back for carrying camera , lenses and other gear.
Listed b&h 320.00 usd. Asking 150.00 usd

For further information ,. my e-mail is [email]maryluoto@yahoo.com. pictures are availabe.

[Greg Patch]

Would this work with a Cartoni Focus Head?

[Rad Sinyak]

Originally Posted by Greg Patch

Would this work with a Cartoni Focus Head?

I have no experience with this head. The bottom of the slider has standard threaded holes and can be attached to a quick release plate. The top part that slides, has a 3/8" post to which a head can be attached.

[Yves Fortin]

Originally Posted by Charles Dasher

Thanks for the reply

With the slider mounted to the tripod how stable is the movement when the camera gets out towards the end of the slider? It seems that it would want to tilt.

I was asking myself the same question. If you use a 35 mm adapter, the weight is more than 10 lbs, so I don't know if this is possible, even with a relatively strong head. A workstand or something like that will be better solution.

Also, how much do the Indislider 36" weight by itself ?

[Dan Gunn]

Model HVL-LBP New in the box! Sells for $499.99 at B&H. I have taken it out of the box but it has never been used on a job and I have all the papers.

$425.oo delivered and insured to the48 states.

JoJo Gunn
info@gunnsphotovideo.com
770-978-3686

[Michael Kladky]

Found what I wanted.
Thank You

[Greg Patch]

email sent

[Nick Papworth]

Hi Guys,

I have some equipment from my previous analogue Beta SP set up for sale.

Am Flexible on price so if any or all of it takes you fancy let me know.

CAMERA

1 x JVC KY-27 Camera body
1 x Fujinon FVZ A14x10 BRM12U (1:1.7/10-140mm) Lens
1 x Sony PVV3 Player (Head drum: 0152, Tape transport: 0082, Total: 0323)

CAMERA POWER

1 x DPL Mains Transformer & Battery Charger
6 x NP-1A Batteries
1 x Sony BC-1WA Charger

VTR

1 x Sony UVW-1800P (Drum: 0059, Tape: 0042, Thread: 0326, Oper: 0775)

MONITOR

1 x Sony PVM 1442QM

EDIT SUITE

1 x Pinnacle Liquid Silver Edit Suite

Liquid Silver Codec – PCI Interface board
Liquid Silver – Breakout Box
Video Inputs: SDI (SMPTE 259 M, Embedded Audio) BNC, 75 Ohms
CVBS (Composite) BNC, 75 Ohms
Y/C (S-Video) 4 Pin Hosiden
Component YUV BNC 75 Ohms, x 3
Video Outputs: SDI (SMPTE 259 M, Embedded Audio)
CVBS (FBAS)
Y/C
Component YUV
Audio Inputs: 4 Channels SDI Embedded BNC, 75 Ohms
2 Channels AES/EBU, XLR, 3 Pin
2 Channels Analog (600/10k Ohms, -6,0,+4,+6 dBU)
Audio Outputs: 2 Channels SDI Embedded
2 Channels AES/EBU
2 Channels Analog
Refernce: Video Out (CVBS, BNC)
Black Burst Out (BNC)
Remote: RS-422 (9 Pin)
Pinnacle Liquid Silver (V 2.55 Software)
Pinnacle Commotion
Pinnacle Impression

Many Thanks,

Nick Papworth

[Reed Gidez]

I've upgraded my edit bay and now have a very nice G5 for sale. $1500 plus s/h and includes original discs (Tiger) and FCS discs and manuals.

The facts:

5.5GB RAM, 250GB HD with OSX ready to roll. In addition to the stock config (ATI Radeon 9600, Pioneer DVD-RW DVR-109) there are THREE additional drive bays making a total of FIVE SATA drive bays, a Sonnet Tempo-X eSATA 4+4 card (current bios for Leopard), additional USB card (4 more ports) additional Firewire (800 and 400), Airport extreme, and Blutetooth. Just add your own extra drives and you are ready to edit! Even inlcudes mouse and new keyboard.

Photos can be seen here
http://gallery.mac.com/jrgidez#100086

I think I have included everything here. Happy to answer all questions!

[Mike Gorski]

If only I had an extra few bucks laying around it wouldn't be laying around your house!

[Joe Hanna]

Patric, Sent you an e-mail

[Henry Cho]

bogen manfrotto 505 fluid head & 3182 tripod w/ floor spreader in nice condition. original owner, well maintained -- it was sent to bogen late last year for a tune-up and is in tip-top working shape. it has some nicks and scratches from regular use.

basically a re-branded gitzo g1380, the 505 is no longer in the manfrotto catalog (supplanted by the 519 a few years back). it's a well-regarded head in the bogen manfrotto lineup, and definitely a step up from the 501s and 503s. it has a max load capacity of 17.7 lbs.

you get:
- 505 fluid head
- camera qr plate (plate compatible with 501 and 503)
- two pan/tilt handles
- 3182 aluminum tripod w/ spikes and retractable rubber feet
- flat base to 75mm bowl adapter
- floor spreader
- spring kit (5 springs & wrench)

will throw in a smooth DIY tripod dolly (skate wheels) as well.

$550 shipped/paypal'd. pickup available in nyc.

http://www.downwiththefuture.com/pictures/505.jpg

email: henry -at- downwiththefuture.com

[Henry Cho]

up for sale is a geardear "large package" mattebox in excellent condition, with extras. we just plonked down a good wad of cash on some of the new redrock accessories, including their mattebox, and i'm trying to recoup some of it. ideally i'd keep the geardear, as it's the lightest mattebox i've ever used and breaks down into slices for easy transport, but we could use the funds.

you get everything in the "large package" detailed here:
http://www.geardear.com/ready4x5.html

and the following extras:
- french flag
- side flags
- aluminum backbone slice (for extra support when using the french flag)
- rotating 4x5.65 filter stage (4 stages total)
- additional 4x5.65 filter tray (4 trays total)
- 2shade hood (2" hood, vs. the standard included 4shade 4" hood -- nice for those super wide lenses)
- set of three masks (for 35mm, 50mm and 85mm field-of-views)
- set of three rings/donuts (50mm, 60mm, 70mm)

i paid well over $700 for everything over the past year or so. asking $350 shipped/paypal'd.

http://www.downwiththefuture.com/pictures/geardear.jpg

email: henry -at- downwiththefuture.com

[Patrick Coker]

The camera and 3x lens are in the process of being purchased. If for any reason the deal fails I will let everyone who emailed me know, in the order I received your email.

also the vl-10 is gone.

thanks