Nikon Mount on BM4k URSA PL at DVinfo.net
DV Info Net

Go Back   DV Info Net > Most Recent Additions... > BlackMagic Cinema Camera

BlackMagic Cinema Camera
EF & MFT lens mount / 2.5K CinemaDNG RAW

Reply
 
Thread Tools Search this Thread
Old June 15th, 2017, 03:45 AM   #1
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Nikon Mount on BM4k URSA PL

Why?


I have a comprehensive set of fast AIS Nikons, which I can't hope to replace cost-wise. Time to get started and draw the proper design and devise the method for least waste of metal stock. The little guys in Dongguan could probably dream about it the night before, design it, make it, hard-chrome finish it and package it before I can and sell it for less than the cost of the metal stock too. - So onward to hunching over the machine and looking like Quasimodo by the end of it all.

There is probably the "doing it because I can, not necessarily because I should" factor at play here as well.
Attached Thumbnails
Nikon Mount on BM4k URSA PL-bmunikon01.jpg  

Last edited by Bob Hart; June 15th, 2017 at 03:47 AM. Reason: add pic
Bob Hart is offline   Reply With Quote
Old June 15th, 2017, 11:06 AM   #2
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

A little furthur info on the process.
Attached Thumbnails
Nikon Mount on BM4k URSA PL-bmursa4kv1nikonspacermount.jpg  
Bob Hart is offline   Reply With Quote
Old June 17th, 2017, 10:41 AM   #3
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

An update on the design diagram
Attached Thumbnails
Nikon Mount on BM4k URSA PL-bmursa4kv1nikonspacermount2.jpg  
Bob Hart is offline   Reply With Quote
Old June 17th, 2017, 10:45 AM   #4
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

Sort of how it will look. The flowcast machined bronze adaptor piece will have the Nikon F-Mount attached to it as it would be to a Nikon camera and the adaptor piece attached to the intermediate BM adaptor piece for the PL-Mount in place of the PL-Mount.

Failed upload will try again. No good again will try later.
Bob Hart is offline   Reply With Quote
Old June 23rd, 2017, 10:19 PM   #5
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

It looks like image upload is permanently impossible with my current computer. It has some idiosyncracies.

Here is a link to some test footage with the Nikons on the BM URSA 4K PL with custom mount.

It was shot in "film" setting which requires colour grading afterwards. The images have not been graded. I deliberately shot in an hostile late afternoon overcast environment against the sun to drive any defects to the surface. So far the results have been encouraging. Professional cine lenses would be better but the Nikons will do in the meantime.

Bob Hart is offline   Reply With Quote
Old July 3rd, 2017, 10:49 AM   #6
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

Here is a sample from the footage shot of the Leeuwin refit.



Bob Hart is offline   Reply With Quote
Old August 14th, 2017, 11:19 AM   #7
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

Here's another iteration of the Nikon mount arrangement. I have added a 0.71 "Ultra" speedbooster optic to the camera throat which yields a wider image to the sensor. In this instance, the flange face of the Nikon lens mount has to be moved 4.2mm closer to the focal plane. It is doable with Nikons but not with Canon EF or PL-Mount.
Attached Thumbnails
Nikon Mount on BM4k URSA PL-ursa-4kv1-speedbooster-internal-assy.jpg   Nikon Mount on BM4k URSA PL-ursa-4kva-speedbooster1-7-.jpg  


Last edited by Bob Hart; August 14th, 2017 at 11:23 AM. Reason: added text
Bob Hart is offline   Reply With Quote
Old August 14th, 2017, 11:27 AM   #8
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

These two images convey the difference between the direct-to-sensor image and the image via the speedbooster optical cell. The chair I forgot to remove after I used it to sit on while I removed the optical cell and reset the mount. The lens aperture setting was left the same.

Here is a quick test shot to a HD recorder outboard of the camera. I did not have a CFast2 card handy at the time.

https://www.youtube.com/watch?v=TQu_...ature=youtu.be
Attached Thumbnails
Nikon Mount on BM4k URSA PL-ursa-plus-speedbooster-test3.jpg   Nikon Mount on BM4k URSA PL-ursa-plus-speedbooster-test4.jpg  


Last edited by Bob Hart; August 14th, 2017 at 11:30 AM. Reason: error
Bob Hart is offline   Reply With Quote
Old August 14th, 2017, 11:31 AM   #9
Inner Circle
 
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,476
Re: Nikon Mount on BM4k URSA PL

I tried to embed the clip but it won't go for some reason.
Bob Hart is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK


DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > Most Recent Additions... > BlackMagic Cinema Camera

Thread Tools Search this Thread
Search this Thread:

Advanced Search

 



All times are GMT -6. The time now is 03:46 AM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network