DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony HVR-A1 and HDR-HC Series (https://www.dvinfo.net/forum/sony-hvr-a1-hdr-hc-series/)
-   -   lost in translation (https://www.dvinfo.net/forum/sony-hvr-a1-hdr-hc-series/105970-lost-translation.html)

Karl Heiner October 18th, 2007 06:09 PM

lost in translation
 
help....

what is the a/v out..outlet plug called ? (hc7)

i like to talk to a sales person at varizoom about a cable (if they have them)to connect their vz-tft-u monitor with my new sony hc7, but my english...<G>

thanks for the help

Dave Blackhurst October 19th, 2007 12:27 AM

there are two outputs, the "A/V out", which has right and left audio, and a composite (yellow) video signal. the other one is the component (R/G/B) out.

BOTH outs use a proprietary sony cable to conect to the camera - A/V is sort of a "D" shape, component is more or less rectangular.

Karl Heiner October 19th, 2007 12:54 AM

hi dave,

well, not the hc 7.
there are the following outs, left side of cc

lanc = light blue
hdv/ dv
composit out
a/v out
head phone = dark blue

hdmi above the charger in

the pic. is on page 106

http://hdr-hc7.info/HDRHC5.pdf

i am guessing they must each their own name?

thanks

Dave Blackhurst October 19th, 2007 04:27 AM

OK, maybe I got my composite and component mixed up...

The A/V out has the yellow plug, and the video signal is on that plug...
The composite out would be the R/G/B - three separate RCA plugs...

What inputs does your monitor support? One of the stock SONY cables should allow you to connect... The R/G/B should be the better quality picture.

Adam Gold October 19th, 2007 01:16 PM

Quote:

Originally Posted by Karl Heiner (Post 761229)
there are the following outs, left side of cc

lanc = light blue
hdv/ dv
composit out
a/v out
head phone = dark blue

hdmi above the charger in

the pic. is on page 106

http://hdr-hc7.info/HDRHC5.pdf

i am guessing they must each their own name?

thanks

Dave had it exactly right.

They are in the following order, from left to right in the picture you described:

LANC
HDV/DV (Firewire)
Component (RGB Cable)
A/V (Composite Red White Yellow)
Headphone

So to answer your original question, A/V out is composite, which is probably what your monitor wants. If your monitor will accept component, use that.

Note that (if it's like the HC3) your cam will only output from the highest level output hooked up at the time. If you have cables in all the outputs, you'll only get HDMI until you disconnect that, then the component will be active, etc.


All times are GMT -6. The time now is 10:25 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network