lcd coverage A1 e at DVinfo.net

Hubert Hofer · June 9th, 2006, 03:24 AM

hi,
i'm after advice re how to set the correct viewing area on the lcd. i recently filmed some closely cropped documents which filled the lcd perfectly. however, when i played the footage on the laptop the image was smaller on the monitor than when i framed it on the lcd during filming. the difference in the framing area is quite substantial and the edges of the documents are showing. i can't seem to find anything on the subject in the operating guide. thanks in advance for any advise.. HH

Gian Pablo Villamil · June 9th, 2006, 03:41 AM

Enable the All Scan mode. This will show a full-frame view in the VF, with a black border. (The border won't be recorded.)

On the A1, it is in the menu, camera settings, lcd/vf settings, all-scan mode.

I usually add it to the P-Menu.

Hubert Hofer · June 9th, 2006, 03:45 AM

hi Gian,
many thanks for your help. much appreciated. cheers H

June 9th, 2006, 03:24 AM	#1
Hubert Hofer Regular Crew Join Date: Aug 2005 Location: Torres Strait - Australia Posts: 76	lcd coverage A1 e hi, i'm after advice re how to set the correct viewing area on the lcd. i recently filmed some closely cropped documents which filled the lcd perfectly. however, when i played the footage on the laptop the image was smaller on the monitor than when i framed it on the lcd during filming. the difference in the framing area is quite substantial and the edges of the documents are showing. i can't seem to find anything on the subject in the operating guide. thanks in advance for any advise.. HH

June 9th, 2006, 03:45 AM	#3
Hubert Hofer Regular Crew Join Date: Aug 2005 Location: Torres Strait - Australia Posts: 76	lcd coverage A1 e hi Gian, many thanks for your help. much appreciated. cheers H

June 9th, 2006, 03:41 AM	#2
Gian Pablo Villamil Regular Crew Join Date: Mar 2006 Location: New York, NY Posts: 138	Enable the All Scan mode. This will show a full-frame view in the VF, with a black border. (The border won't be recorded.) On the A1, it is in the menu, camera settings, lcd/vf settings, all-scan mode. I usually add it to the P-Menu.