DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony HVR-A1 and HDR-HC Series (https://www.dvinfo.net/forum/sony-hvr-a1-hdr-hc-series/)
-   -   HVR-A1U - Best Matte Box? (https://www.dvinfo.net/forum/sony-hvr-a1-hdr-hc-series/69975-hvr-a1u-best-matte-box.html)

Scott Karlins June 21st, 2006 12:10 PM

HVR-A1U - Best Matte Box?
 
Hello all,

Excellent Forums! I have learned alot here...

I am looking into a Matte Box for the A1U...

Looking at Cavisions 3x3" Rubber Shade Matte Box, MB385/P/M/W with French Flap and 8mm Rods. Total cost from Cavision is $340. with the French Flag, 8mm Rod Kit and the MB385.

I will be using it with the Sony VCL-HG0737Y wide angle lens.

Will this work ok? Will it fit-up properly to the lens?

Thank you, Scott K.

Gareth Watkins June 21st, 2006 12:37 PM

Hi Scott

Probably your best value Matte boxes on the market are the Formatt or the TLS Kestrel

I have the Kestrel on my Z1 but both units are very similar in design... robust and well-made. They hold two filters, one fixed and one rotating for say, a polarizer...I got a set of Schneider filters and am now looking for a couple of grads..

I paid less than £300 ordering from the UK.

Check : http://www.2filter.com/Formatt/formattFM500.html for a US distributor.

regards
Gareth

Scott Karlins June 21st, 2006 12:43 PM

Gareth,

So, you do NOT need a rail kit in order to use this Matte Box?

Thanks, Scott K.

Martin Mayer June 21st, 2006 01:47 PM

No, the Formatt screws (with an adapter) into the filter thread - so it is only usable with internally focussing lenses - like the A1.

Be warned - it will dwarf the A1 though!

Gareth Watkins June 21st, 2006 04:14 PM

Hi there

Martin is right it is a fairly hefty unit... perhaps too big for the A1...it fits fine on a camera the size of a Z1 and as he says fits easily with an adapter ring... I use it a lot with a polarizing filter for my work.

Maybe something by Cokin would better suit the A1...
http://www.bhphotovideo.com/c/produc...Hood_with.html

I used to use this system on my TRV950 which I believe has the same size thread of 37mm...

Regards
Gareth

Ben Winter June 21st, 2006 05:40 PM

I have that Cavision you were looking at and, provided you buy a rod support system too, it is the perfect size. I use it with my 35mm adapter.

Hubert Hofer June 21st, 2006 06:51 PM

HVR-A1U - Best Matte Box?
 
hi,
i bought the formatt 500 and yes it does dwarf the a1 but in a great looking way. this model is very well designed and fits two filters. however, i personally would not buy it again for the simple reason that the plastic material is very, very poor and i've had to replace several fittings and also managed to repair and make new parts myself. if the formatt 500 were made of good material it could easily be one of the best matte boxes on the market.

Scott Karlins June 22nd, 2006 03:24 PM

I went with the Cavision setup.

I will be receiving it tomorrow, and will post photo's when I get it all installed.

Thank you all for your posts!

Thanks, Scott K.

Scott Karlins June 27th, 2006 01:57 PM

Photo's of the Cavision 3x3 Matte Box & 8mm Rails
 
Here it is!

I have it currently setup with the Sony VCL-HG0737Y wide angle lens.

Enjoy!


http://homepage.mac.com/skarlins/HVR_A1U/_DSC2833.JPG
http://homepage.mac.com/skarlins/HVR_A1U/_DSC2834.JPG
http://homepage.mac.com/skarlins/HVR_A1U/_DSC2835.JPG
http://homepage.mac.com/skarlins/HVR_A1U/_DSC2836.JPG
http://homepage.mac.com/skarlins/HVR_A1U/_DSC2837.JPG
http://homepage.mac.com/skarlins/HVR_A1U/_DSC2838.JPG
http://homepage.mac.com/skarlins/HVR_A1U/_DSC2839.JPG
http://homepage.mac.com/skarlins/HVR_A1U/_DSC2840.JPG


Thanks, Scott K.

Dennis Kane June 28th, 2006 02:35 PM

Very nice Scott, thank you for the great photos. This is the finest matte box system for the A1 I have seen.
D Kane

Ian Greenfield July 7th, 2006 09:18 AM

Scott,

I talked to a Cavision rep and he said the setup you describe (and have photographed) is impossible. Can you tell me how you got the Matte Box to fit with the Sony VCL-HG0737Y?

Thanks much,
Ian

Alex Thames July 7th, 2006 07:56 PM

Question: what makes one matte box system better than another? Isn't their purpose simply to hold filters? How hard can that be - perhaps a completely naive question, but I don't understand.

David Ziegelheim July 9th, 2006 02:11 AM

I have the Cavision 3x3 on my JVC DV300. Does your setup need the rods?

Does it allow full width with the wide angle adapter?

Scott Karlins July 11th, 2006 10:11 AM

RE: HVR-A1U - Best Matte Box?
 
Ian,

I worked with Bernie at Cavision. Ask for him, and mention my name. He will remember my setup, and get you the same stuff. The system works great.

I got the following:

-3x3 Matte Box in ABS plastic
-Extra long 'T' Bracket for the Matte Box (so the matte box will align with the lens) --This piece is important, so be sure he substitutes it for the stock shorter 'T' Bracket.
-8mm Rod Set
-French Flag
-A1U spacer (so I can eject tapes with the rod set mounted)
-Plastic Adapter Ring (to go from the 3x3 matte box to the Sony VCL-HG0737Y)

I added a thin piece of the fuzzy side of velcro to the inside of the adapter ring, so that it would fit up snug to the outside of the Sony VCL-HG0737Y.

Workes great, and I can use the Sony VCL-HG0737Y at full wide with no problems.

Thnaks, Scott K.

Ian Greenfield July 11th, 2006 10:41 AM

Much appreciated, sir.


All times are GMT -6. The time now is 01:36 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network