![]() |
25P issues
I don't quite understand why threads dealing with 25P issues keep getting closed. This issue is extremely important to anyone in PAL-land considering the V1E, particularly in light of recent announcements from Sony. I'd be very grateful if people could continue posting whatever information they have on the 25P issue here.
I would request that you refrain from posting in this thread if you do not have direct experience or new information on the 25P issue, or wish to discuss matters other than the 25P issue. Thank you. |
Like you, Mike, I'd like to ask all those affected to keep posting about any new information on the problem, refraining from anything that would justify closing the thread again...
|
Mike, I would suggest if you have the time getting to the VideoForum in Earls Court on February 6-8 (http://www.videoforum.co.uk) - Sony always have a big stand there and it is a good place to see such things close up. It was where at the 2005 show I first saw the Z1E in the flesh (and subsequently talked my department into buying two, with no regrets). It is almost certain that Sony will have V1Es (and maybe FX7s) there.
Sorry if you already know all about this and are going. Don't mean to tell you what you already know but it's something not everyone will know about. I can't myself see what more information there can be at the moment, and if there is I'm sure it'll be posted in a new thread for everyone's benefit. At the risk of wondering off topic, the threads were closed because I think the relevant facts had been exhausted and were going around in circles. |
Quote:
http://www.dvinfo.net/conf/showthread.php?t=84616 |
From the informative to the minor gripes to the all out bitching, its forums and comments, (nit picking and all) that give people like me a very clear understanding as to how good or bad hardware like this really is.
Compared to a small note somewhere saying "25p is flawed in the v1e". |
I too am appreciative of the chance to discuss this issue.
I'm not interested in any of the debate that has been attached to it so I would like to keep it informative only. And as such, I just spoke to Sony Australia who assured me that the V1P over here has "NO ISSUES WITH THE PROGRESSIVE FUNCTION. IT IS A FULLY FUNCTIONAL CAMERA THAT WAS RELEASED WITH THE FIX ALREADY COMPLETED." |
Quote:
It's also been claimed Sony has removed all references to 24p from their website: http://www.sonybiz.net/ Well here's what the website says about the V1E: "Progressive scan (25p) capability and full HDV resolution The HVR-V1E is a compact and lightweight professional HDV camcorder, sharing similar dimensions to the popular DSR-PD170P The HVR-V1E is the first Sony professional to incorporate 3 ClearVid CMOS sensors. Coupled with Sony's Enhanced Imaging Processor (EIP) these sensors provide high sensitivity, low noise and a wide dynamic range to help achieve high-quality, smearless images. In addition to offering 1080/50i acquisition, it also provides 25p shooting - making it ideal for film-makers with smaller budgets and those who wish to create a more cinematic look and feel to their production. Other professional features include timecode preset function, two XLR microphone inputs, a timecode link to synchronise time codes between multiple cameras and HDV/DVCAM/DV recording and playback for flexible workflow options." |
Given that Sony can be tight-lipped, I am in favour of sharing any info we can get a hold of - without debating its validity. Having just spent a large amount of my company's money on a V1P, I'm in a position where I feel I need to regularly update my partners to assure them I haven't made a huge mistake so the more I hear from more sources the more comfortable I feel. When I speak to people from Sony I don't feel they know as much as some of the knowledgable folks here, so I'm all about using each other and each other's experiences to our advantage.
|
2 Attachment(s)
Quote:
check now the same site under "Features" And here is a .pdf of it to prove (25p.pdf) I attach another .pdf that came from Sony Support who took my camera for a firmware update and ask me to torn down sharpness to 3 (!!!) in order to avoid "Line flicker" as they call it, resulted as a side effect of their fix. Btw, it was NOT me who has found the site modification and posted here. |
I feel obliged to back Zsolt up on this. Sony has indeed removed, then put back most 25p references on the web site in question. Also, I have received an e-mail from PrimeSupport to the exactly same effect as Zsolt's; here it goes (just copied and pasted original message in RTF):
__________________________________ Hello Piotr, Unfortunately, we cannot comment on anything posted on a non-Sony site. PrimeSupport have indeed been advised by the Product Team that the modification has now been re-released for upgrade. The loss of resolution in 25P mode is corrected now by the mod. The "Line Flicker" that can be seen after the mod can be eliminated by reducing the "Sharpness" setting in the Picture Profile menu of the camera. The HVR-V1e remains the only HDV format camera whose chip scans in real Progressive Scan in 1080. If your camera has not been modified, please contact the helpdesk and we will arrange to have the modification performed at our repair centre. If your camera has been modified and you remain unsatisfied with the results, please contact your point of sale. |
Today I took our moded V1P outdoors and shoot a few minutes of footage just before dusk. The scene included some trees with very fine needle like leaves. The overall scene had good light levels, enough for the camera to suggest I needed ND1 engaged. Camera was in Auto at 50i.
I captured the footage into Vegas 7.0d and proceeded to watch it at full res. Mostly it looked pretty good, perhaps a little more noise than I'd have expected but apart from that a pretty appealing image, no aliasing noticed. However in the darker areas of those fine leaves there it was, this sudden loss of almost any resolution, whole large areas devoid of any detail. With enough of the tree in the frame it was very visually distracting. Now here's the problem with what I've seen and what I've said about it. Until others can reproduce the problem in a controlled environment it's really not worth much, maybe I'm a lousy cameraman, maybe my glasses are on the fritz, maybe I'm just an idiot. I can't really prove anything one way or the other so I can't really help directly other than add my voice to what others are saying, there does seem to be something unusual going on. What we need is some hard science bought to this issue, the specific camera settings, a reproduceable image in front of the camera at a specific level of illumination and ideally a test measurement that measures the result. Just the same as we would measure resolution or light sensitivity. Sony might very well believe there isn't a problem, I doubt you'd see what I saw under any of the standard tests cameras are subjected to. I'd bet I could shoot 100s of hours of footage and probably never notice it either. Or maybe there isn't a problem at all, maybe it's just a case of knowing how best to use the camera. Now there's people here way more knowledgeable than me, perhaps they can recommend a starting point for a quantitative test to try to resolve this issue. If we do find something then we've got something for others, even Sony, to look into. Until it's hard science it'll just keep ending up in he said, she said stuff with bruised egos and folks defending their position. |
Quote:
Only thing is .... you said in your post that the cam was in 50i mode? is that right? Because up til now everyone has been full of praise abotu the 50i mode and all the 'issue' discussion was about the 25p mode. Can you confirm that you did really shoot in interlaced mode ?? thanks |
Quote:
And if you did 25p without problem, I would appreciate if you can share some of the raw footage (with sharpness setting info etc). Thanks Bob. |
Quote:
Also it's worth repeating that there has been NO official "announcement" from Sony. One more warning to a handful of people... threads get closed on this site most often due to personal attacks and flaming. For clarification, see http://www.dvinfo.net/conf/showthread.php?t=84616. I've already had to do a couple of edits here. If you find that *this* thread has been closed, it means that somebody ignored my very clear indications about what is not acceptable on DV Info Net. And now, back to *technical* and *creative* matters... thanks in advance, |
Thank you Chris, you are one step ahead then me.
|
All times are GMT -6. The time now is 03:28 AM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network