Z1P - Headphone Output not working

[Joe Lawry]

Hi,

After months of trying to work which camera to upgrade from my pd150 i went with a slightly second hand Z1p in extremely good condition.

Took it out for its first shoot last night with a shotgun mic plugged into XLR input 1 filming a concert. I get there to find that im not getting any audio coming out of my headphone jack when i've got my sennheiser cans plugged in.

I am definately getting audio levels coming though, however nothing is going to my cans. I then changed from the XLR input to the camera mic and got sound through the cans. I also played with audio settings but found none that were to do with my problem

Am i missing something here or will the Z1 (or maybe just my Z1) not play out anything to my headphones when using external Mics?

Thanks.

[Joe Lawry]

Well after some more testing i figured out it was working, but the levels coming through the cans were just very low, a lot lower than my PD150 ever was. Time to try some new cans.

[David Lombard]

Hi, you can adjuste the headphone output level, in the camera setting

output level, 1vms or 2 vms

try this

[Nathan Troutman]

Also, volume control for the headphones is with all of the VCR controls that are with the LCD display. Pump up the volume.

[Joe Lawry]

Yup, i tired both of those suggestions, and it still seems lower than my PD150 - i guess i'll just up the dB in the audio settings.

Thanks

[Heath McKnight]

Try another set of headphones--I had a similar problem recently and swore something was wrong. It ended up being the headphones, which were a bit pricey, so I was upset.

If that doesn't work, try calling Sony's tech support--Z1 is pro, and they're excellent.

heath