DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony NXCAM NEX-FS100 CineAlta (https://www.dvinfo.net/forum/sony-nxcam-nex-fs100-cinealta/)
-   -   Taking WB measurments to store in A/B (https://www.dvinfo.net/forum/sony-nxcam-nex-fs100-cinealta/503523-taking-wb-measurments-store-b.html)

Piotr Wozniacki December 13th, 2011 06:28 AM

Taking WB measurments to store in A/B
 
Below is the relevant excerpt from the user manual:

"To save the adjusted white balance
value in memory A or B
1 Set the AUTO/MANUAL switch E to
MANUAL.
2 Press the WHT BAL button A.
3 Set the white balance memory switch to
A ( A) or B ( B).
4 Capture a white subject, such as white
paper, full-screen in the same lighting
condition as the one in which the subject
is.
5 Press the (one push) button C.
The adjusted value is stored in A or
B. The stored color temperature
appears for about 3 seconds
"


Nowhere is it said that for the procedure to work, the camera must be in Stand-by mode. And yet it doesn't work while rolling - is it normal? With my EX1, I can push and adjust AWB without stopping recording...

I'm not ranting - just want to know whether my unit is functioning normally :)


All times are GMT -6. The time now is 04:28 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network