Sony UWP-C1 and C2 interference (Wireless Mics)
 

Hi,

I own and work for a videography company in South Florida.

During our filming last week, we used both the UWP-C1 and C2 while filming (each camera was connected to one mic.)

However, while reviewing our film, we found that the two devices had interfered with one another, equalling in static and eventually, a loss of audio from both devices.

What can be done to solve this problem, in turn allowing use of both devices (mics) without any interference?

Thank You,
Warmest Regards,

:)

Use headphones all the time! It's a rule if audio is important.

Test frequency first before shoot. Can Sony scan for clear frequencies? I use the Sennheiser EW100G2 and that feature has saved me in the RF capital of the world (NYC). Sennheiser publishes "in use" frequencey charts which, of course, can be useful for any wireless. kit.

Here's Florida by city
http://www.sennheiserusa.com/newsite.../FLORIDAew.PDF

Are you using both wireless sets straight out of the box (ie. have you changed the channel/frequency setting on one of them)?

I have two sets that I use on the same camera at the same time (one is a channel 62 model and the other is a channel 66 model so there is no possibility of interference). They work great.

Curt