matte box at DVinfo.net

Brian Jansen · December 5th, 2007, 05:11 PM

Has anyone fitted the EX with a matte box yet?
I added a 77mm clear digital protection filter, then 77mm to 82mm step-up ring and the Matteblox HD and large flag fits nicely. Nice monitor hoodie too.

Chris Forbes · December 7th, 2007, 02:27 PM

Here is a Chrosziel 4x4 matte box on rods. If only the LCD would close.

Steven Thomas · December 9th, 2007, 10:58 AM

Anymore EX1 matte box solutions that are inexpensive, but also complete with bae, rails, and flags?
I don't want any additional weight on the lens.

Dennis Kane · December 9th, 2007, 11:30 AM

I talked to Brian Valente of Redrock last Wednesday at DVexpo and specifically requested from him that the new matt box will allow the use of graduated neutral density filters. I told Brian that I need to be able to raise the filters vertically and also rotate them at the same time and that this system will work on the new EX 1. Brian assured me that his matt box will do this
Dennis Kane

Vince Gaffney · December 9th, 2007, 11:36 AM

Quote:

Originally Posted by Steven Thomas

Anymore EX1 matte box solutions that are inexpensive

Inexpensive and quality are two word rarely found in combination to describe a matte box/ rails/ baseplate system. However, Red Rock is getting ready to ship theirs in the coming months. You may want to look at that.

vince

Steven Thomas · December 9th, 2007, 11:57 AM

LOL, I knew that would be the first reply. ;)
Will the Red Rock be the cheaper attach to the lens or the full rail system ?

Vince Gaffney · December 9th, 2007, 12:05 PM

Full system. I have their follow focus, base plate and 2 sets of their rails. Excellent quality all around. I expect the upcoming matte box to be equally sound.

http://www.redrockmicro.com/microMattebox.html

vince

Steven Thomas · December 9th, 2007, 12:08 PM

Do you have an idea what entire rig - base, rails, matte box and flags will cost?

Vince Gaffney · December 9th, 2007, 12:15 PM

The word is the box is about 500. not sure on the side flags. the base plate is about 250, 75 - 100 per set of rails depending on length. Probably in the 1K neighborhood all in. You can go to their store online and check all of it out except for the actual matte box and wings.

vince

Alvise Tedesco · December 9th, 2007, 03:09 PM

Quote:

Originally Posted by Dennis Kane

I talked to Brian Valente of Redrock last Wednesday at DVexpo and specifically requested from him that the new matt box will allow the use of graduated neutral density filters. I told Brian that I need to be able to raise the filters vertically and also rotate them at the same time and that this system will work on the new EX 1. Brian assured me that his matt box will do this
Dennis Kane

I think there has been some kind of misunderstanding between you. Brian is enthusiast on the EX1, but from pictures and measures IT LOOKS (at least to me) like Redrock mattebox can't be a perfect (so..raise/rotate grads) fit for the EX1. For sure ok with an EX1+35 adapter, but that's a different story!

Chris Forbes · December 11th, 2007, 10:24 PM

Chrosziel has announced their Matte box for the EX-1

http://16x9inc.com/products/chroszie...40-03ex1k.html

Bill Spence · December 11th, 2007, 11:11 PM

That was the link for the sunshade. The link for the mattebox is here:

http://16x9inc.com/products/chrosziel/ac-450-ex1k.html

Jiri Bakala · December 11th, 2007, 11:55 PM

Quote:

Originally Posted by Chris Forbes

Here is a Chrosziel 4x4 matte box on rods. If only the LCD would close.

I am not sure whether I am seeing it right but did you turn the trays upside down? Someone somewhere suggested that if the trays are accessible from the bottom, the matte box fits with the LCD and all. It would be a pain in the neck when used with rods because it would essentially mean removing the matte just to replace a filter but at least the LCD should close properly.

If only someone could hammer it into the SONY designers' heads that these cameras will be used with matte boxes and most likely with better external microphones so that they stop putting in the built-in mikes and make some room for the matte boxes. How bloody difficult is this?

Chris Forbes · December 12th, 2007, 12:02 AM

I did turn the trays upside down. And with the mount for the matte box at the end of the rods they go in and out easily. I just need to figure out that LCD thing.

Brian Jansen · December 12th, 2007, 06:53 PM

The Cavison Matte Box is worth a try as well. It looks like a tight fit but it clears with the LCD closed.

http://www.cavision.com/pictures/EX1...SPWM-EX1-2.htm

Anyone here using this can maybe comment on it? Looks like a medium priced
solution.

December 5th, 2007, 05:11 PM	#1
Brian Jansen Regular Crew Join Date: Aug 2006 Location: providence, RI Posts: 107	matte box Has anyone fitted the EX with a matte box yet? I added a 77mm clear digital protection filter, then 77mm to 82mm step-up ring and the Matteblox HD and large flag fits nicely. Nice monitor hoodie too. Attached Thumbnails

December 7th, 2007, 02:27 PM	#2
Chris Forbes Regular Crew Join Date: Mar 2006 Location: Salt Lake City, Ut Posts: 155	Here is a Chrosziel 4x4 matte box on rods. If only the LCD would close. Attached Thumbnails

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

December 9th, 2007, 10:58 AM	#3
Steven Thomas Trustee Join Date: Sep 2005 Location: Gilbert, AZ Posts: 1,896	Anymore EX1 matte box solutions that are inexpensive, but also complete with bae, rails, and flags? I don't want any additional weight on the lens.

December 9th, 2007, 11:30 AM	#4
Dennis Kane Regular Crew Join Date: Feb 2004 Location: san francisco, ca Posts: 106	I talked to Brian Valente of Redrock last Wednesday at DVexpo and specifically requested from him that the new matt box will allow the use of graduated neutral density filters. I told Brian that I need to be able to raise the filters vertically and also rotate them at the same time and that this system will work on the new EX 1. Brian assured me that his matt box will do this Dennis Kane

December 9th, 2007, 11:57 AM	#6
Steven Thomas Trustee Join Date: Sep 2005 Location: Gilbert, AZ Posts: 1,896	LOL, I knew that would be the first reply. ;) Will the Red Rock be the cheaper attach to the lens or the full rail system ?

December 9th, 2007, 12:05 PM	#7
Vince Gaffney Regular Crew Join Date: Dec 2005 Location: Chicago, IL Posts: 146	Full system. I have their follow focus, base plate and 2 sets of their rails. Excellent quality all around. I expect the upcoming matte box to be equally sound. http://www.redrockmicro.com/microMattebox.html vince

December 9th, 2007, 12:08 PM	#8
Steven Thomas Trustee Join Date: Sep 2005 Location: Gilbert, AZ Posts: 1,896	Do you have an idea what entire rig - base, rails, matte box and flags will cost?

December 9th, 2007, 12:15 PM	#9
Vince Gaffney Regular Crew Join Date: Dec 2005 Location: Chicago, IL Posts: 146	The word is the box is about 500. not sure on the side flags. the base plate is about 250, 75 - 100 per set of rails depending on length. Probably in the 1K neighborhood all in. You can go to their store online and check all of it out except for the actual matte box and wings. vince

December 11th, 2007, 10:24 PM	#11
Chris Forbes Regular Crew Join Date: Mar 2006 Location: Salt Lake City, Ut Posts: 155	Chrosziel has announced their Matte box for the EX-1 http://16x9inc.com/products/chroszie...40-03ex1k.html

December 11th, 2007, 11:11 PM	#12
Bill Spence Regular Crew Join Date: Nov 2007 Location: Indianapolis, IN Posts: 29	That was the link for the sunshade. The link for the mattebox is here: http://16x9inc.com/products/chrosziel/ac-450-ex1k.html

December 12th, 2007, 12:02 AM	#14
Chris Forbes Regular Crew Join Date: Mar 2006 Location: Salt Lake City, Ut Posts: 155	I did turn the trays upside down. And with the mount for the matte box at the end of the rods they go in and out easily. I just need to figure out that LCD thing.

December 12th, 2007, 06:53 PM	#15
Brian Jansen Regular Crew Join Date: Aug 2006 Location: providence, RI Posts: 107	The Cavison Matte Box is worth a try as well. It looks like a tight fit but it clears with the LCD closed. http://www.cavision.com/pictures/EX1...SPWM-EX1-2.htm Anyone here using this can maybe comment on it? Looks like a medium priced solution.