Are the HD Analog Component and HD-SDI outputs live simultaneously?
Hi all,
Was wondering if the HD Analog Component and the HD-SDI output connectors are live simultaneously? For instance, HD Analog to an onboard monitor, and the Uncompressed HD-SDI to a recording device... Thanks, Lonnie |
Yes they are.
|
Thanks Vince...
Have you used it this way? And is the HD Analog a little soft in the monitor compared to the lcd or does everything look great?? Lonnie |
I just plugged them both into monitors at the same time to answer your question. HDSDI into a Marshall and component into a Sony 23" LCD.
They looked fine, although I didn't get real critical and was messing with my Letus at the time. Vince |
I really appreciate the test and your time!
Thanks Vince, Lonnie |
Has anyone successfully taken 10bit 4:2:2 from the EX1 HD-SDI port directly into PremierPro (or any other 10 bit editor) with a hardware card like the V3HD?
|
I have previewed in FCP the HDSDI through a Kona LHe. As far as capturing, my drives are not set up for uncompressed HD. The preview looks great as does the signal into the Marshall LCD panel.
Vince |
All times are GMT -6. The time now is 11:09 PM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network