|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
May 21st, 2008, 09:35 AM
|
#1 |
|
Regular Crew
Join Date: Apr 2004
Location: Norway
Posts: 87
|
EX-1 to HVR-60
Have anyone tried to record HDV signals from EX-1 to HVR-60? I was hoping for a buffer recording in the EX-1 or EX-3, but that didn't happen.
|
|
|
|
May 21st, 2008, 10:06 AM
|
#2 |
|
Inner Circle
Join Date: Aug 2006
Location: Poland
Posts: 4,086
|
Yes, it works flawlessly - but only in SP mode.
__________________
Sony PXW-FS7 | DaVinci Resolve Studio; Magix Vegas Pro; i7-5960X CPU; 64 GB RAM; 2x GTX 1080 8GB GPU; Decklink 4K Extreme 12G; 4x 3TB WD Black in RAID 0; 1TB M.2 NVMe cache drive |
|
|
|
|
May 21st, 2008, 10:36 AM
|
#3 |
|
Inner Circle
Join Date: Feb 2004
Location: Brooklyn, NY, USA
Posts: 3,841
|
When you consider the camera is handling about 87.5mbps when doing 60fps overcrank you'd think/wish Sony would find a way to buffer 1 or 2 seconds of data in a loop when not using S&Q motion.
If you look at the XML file in the BPAV folder there's a cache record setting in there set to "off" so they had to have been thinking of this. I guess there's some technical obstacle to this specific to the EX series. I don't think it was even mentioned with the announced hard drive for the camera. |
|
|
|
|
May 21st, 2008, 11:46 AM
|
#4 |
|
Regular Crew
Join Date: Apr 2004
Location: Norway
Posts: 87
|
Thank you Piotr and Craig. That will give me an alternative, not the best, but it will do the job until better portable solutions are on the marked.
|
|
|
|
|
| ||||||
|
||||||
|
|
