Am I missing anything?
 

I am looking to enhance my EX-3 capabilities. After researching I have finally settled on the following items. What I need to know is have I missed anything out and if this will all connect together. (i.e. I am assuming the nanoFlash comes with the relevant HD-SDI Cable).

1. Protech ST-7 Shoulder Mount (For the PMW-EX-3)
2. Protech DC-EX3 Power Supply Cable (For the PMW-EX3)
3. Three short BNC Thin Patch Cables
4. Sony VCT-14 Quick Release Tripod Plate
5. IDX Endura 10 Lithium-Ion Starter Kit (Supplied with: 1 x VL-2Plus Charger, 2 x E-10 Endura Batteries and 1 x Power Supply Cable)
6. Convergent Design NanoFlash
7. Convergent Design 4-Pin Hirose to D-Tap
8. Cold-Shoe Tripod Mount (Until Convergent Design bring out the box that fits between the V-Lock Battery and the Mount).

Thanks in advance!

Something I forgot to mention in my original post! A bag! What bag do people use with this set-up? Will it fit in the Kata CC-197?

Hope you haven't forgotten your 32GB compact flash cards.

Thanks Andrew! I'm ordering 32GB Sandisk Extreme III. Missed it off the list though.

I have sinced found out the I also need to purchased a HD-SDI Cable as well.