anton bauer qrex3 goldmount adaptor/ex3 at DVinfo.net
DV Info Net

Go Back   DV Info Net > Sony XAVC / XDCAM / NXCAM / AVCHD / HDV / DV Camera Systems > Sony XDCAM EX Pro Handhelds

Sony XDCAM EX Pro Handhelds
Sony PXW-Z280, Z190, X180 etc. (going back to EX3 & EX1) recording to SxS flash memory.

Reply
 
Thread Tools Search this Thread
Old December 15th, 2010, 12:34 AM   #1
Major Player
 
Join Date: Jun 2008
Location: Houston, TX
Posts: 563
anton bauer qrex3 goldmount adaptor/ex3

has anyone tried this for the ex3
anton bauer qr-ex3

seems it would balance the cam better, would prefer something simple like this that having to attach one of the many shoulder adaptors out there.
Jim Stamos is offline   Reply With Quote
Old December 15th, 2010, 07:30 AM   #2
Major Player
 
Join Date: Sep 2008
Location: Vancouver, Canada
Posts: 975
Yes it does balance the camera out a somewhat better but not as good as the mounts where you throw the batt right over your shoulder... as expected. Two great things, no 3 great things about this unit. Relatively cheap considering you get a Gold mount adapter and a cord in the unit. You also get a D-Tap/P-Tap plug in the top of the gold mount for attaching accessories and there are a couple of screw holes along the side that are designed to allow you to attach a BEC plate. You can slap some industrilal velcro on them for mounting things like wireless receivers, a nanoFlash and the like. Makes for a very compact setup.

Here's a BEC plate...

http://www.bhphotovideo.com/c/product/283980-REG/BEC_BEC_ABSPU_ABSPU_Side_Plate_for.html

You can remove the protruding bits. Those are designed for people with Lectrosonic wireless units.
Andrew Stone is offline   Reply With Quote
Old December 15th, 2010, 07:55 AM   #3
Sponsor: Westside AV
 
Join Date: Dec 2008
Location: Mount Washington Valley, NH, USA
Posts: 1,365
You may be interested in my AntonBauer or IDX solution, I make both.

This really balances the camera and makes the base of the Camera very solid.

There is also a "wing" and NanoFlash Arms available to hold accessories that also helps balance and are rugged mounts.

In the photos below the IDX plate is shown, but I have AB plates in stock as well.

The D-tap is left open, for accessories and there is a power chord for the EX3 directly out of the plate.

You can order on line, or contact me directly.
olof@westsideav.com
603-383-9283
www.westsideavstore.com
Attached Thumbnails
anton bauer qrex3 goldmount adaptor/ex3-ex3sbab1.jpg   anton bauer qrex3 goldmount adaptor/ex3-ex3sbab2.jpg  

anton bauer qrex3 goldmount adaptor/ex3-ex3sbab3.jpg  
__________________
Olof Ekbergh • olof@WestsideAV.com
Westside A V Studios • http://www.WestsideAVstore.com/
Olof Ekbergh is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK


DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > Sony XAVC / XDCAM / NXCAM / AVCHD / HDV / DV Camera Systems > Sony XDCAM EX Pro Handhelds

Thread Tools Search this Thread
Search this Thread:

Advanced Search

 



All times are GMT -6. The time now is 10:05 PM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network