Front cover on ex1r reset switch?
 

Hey guys,

So i foolishly popped the cover on the front of the camera off.

its the one that covers what i assume is the reset switch.

Now the little rubber nubs that hold it in place will not go back into the holes.

any advice?

Re: Front cover on ex1r reset switch?
 

There is no reset switch. Those are calibration adjustments for the lens, I strongly recommend you don't fiddle with them.

Try putting a tiny bit of washing up liquid on the rubber.

Re: Front cover on ex1r reset switch?
 

I'll give that a try in the morning thanks!

Anyway to tell if I accidentally mucked up the lens calibration?

Re: Front cover on ex1r reset switch?
 

Unless you fiddled with the little adjusters you should be OK.