SDI and HDMI output in SP mode
 

Hello,
I'm shooting a project next week recording internally in SP 1440, 23.98. I am unable to get a signal from both the HDMI (for the EVF) and the SDI or A port (for the monitor) at the same time. I am also unable to get a solid video signal from the VIDEO output. Is there something I can do in the menus to address these?
Thanks!

Re: SDI and HDMI output in SP mode
 

David,

Do you have the output set for PsF? If so turn it off.

That setting can cause trouble with monitors that don't support that mode.

Re: SDI and HDMI output in SP mode
 

Video Out only works when the camera is set to output SD. When the Sdi/HDMI is set to HD you just get sync on the video out connector.

Re: SDI and HDMI output in SP mode
 

Hi Chris,
The problem isn't getting a picture; the problem is getting a picture simultaneously through the SDI or A port and the HDMI when in SP recording mode.

I will try the VIDEO output with your suggestion. Or not...I just saw Allistair's note.

Re: SDI and HDMI output in SP mode
 

Set Video output to HD Y. I have not tried it, but you should get a black and white HD signal.

Re: SDI and HDMI output in SP mode
 

David C. Williams
Re: SDI and HDMI output in SP mode
Set Video output to HD Y. I have not tried it, but you should get a black and white HD signal.

But I need a color signal.

Re: SDI and HDMI output in SP mode
 

Sorry then, your out of luck. SD colour or HD black and white.

Re: SDI and HDMI output in SP mode
 

Alister is correct. HDI set to SD, I get a composite video signal through the VIDEO output.

Re: SDI and HDMI output in SP mode
 

Go here and get the supplemental manual - Sony Product Detail Page PMWF3L

It will show you all the signal output combination in the different video modes of the camera. Start reading at page 20.

You will want to make sure your camera has the latest firmware (v1.3). There were some issues with simultaneous HDMI and HDSDI output with the original F3 firmware.

You want to make sure that SDI dual link ports A/B are set to OFF.

In the VIDEO SET menu “SDI/HDMI/i.LINK I/O Select” setting = HD SDI &
HDMI

Make sure 24 PsF is turned OFF

with those settings you should get:

Video recording mode to the card
SP 1440/23.98P

HDMI output will be
1920×1080/59.94i

Monitor SDI output will be
1920×1080/59.94i

Video output will be:
HD-Y (B&W)

Re: SDI and HDMI output in SP mode
 

Before we upgraded to the current firmware v. 1.31, we were able to get simultaneous output from SDI and HDMI outputs. Now we can't

"You want to make sure that SDI dual link ports A/B are set to OFF."
I find no menu item to do this.

"In the VIDEO SET menu “SDI/HDMI/i.LINK I/O Select” setting = HD SDI &
HDMI" This option does not show up in the menu anymore

"Make sure 24 PsF is turned OFF"
I don't find this in the menus either.

So, any ideas, gents?

Re: SDI and HDMI output in SP mode
 

Absolutely. That option is not available because you have the main SDI ports enabled.

Please download the latest OM from Sony and read page 115. It indicates the combinations of the output settings. Some settings you choose make others disappear.

The manual that came with the camera is now out of date since you have installed v1.3 of the firmware. The options have changed.

Solved!
 

In order to access the menus the Chris mentioned, I changed the format to an HQ one, turned off the DUAL LINK and then, when I went back to SP I was able to choose" HD SDI and HDMI".

Thanks all for your help.

db

David Brown

Tampa cameracrew HD, Sony PDW-700, Panasonic HDX-900

Re: SDI and HDMI output in SP mode
 

Awesome. Glad you got it straightened out.

I wish the menus would work a bit differently in that regard. Its not easy to figure out.