Oil Legs? at DVinfo.net

Ron Edwards · July 17th, 2006, 12:40 PM

The legs on my Bogen 3011BN are getting stiff where they pivot near the head. Does any know if putting a drop of light weight oil on the pivots is a good or bad idea?

Greg Boston · July 17th, 2006, 01:29 PM

I would try a teflon based spray such as 'Triflow'. I used to use that on the steel guide rails for printer heads and it works great.

-gb-

July 17th, 2006, 12:40 PM	#1
Ron Edwards Regular Crew Join Date: May 2004 Location: Fairview Heights, Illinois Posts: 148	Oil Legs? The legs on my Bogen 3011BN are getting stiff where they pivot near the head. Does any know if putting a drop of light weight oil on the pivots is a good or bad idea?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

July 17th, 2006, 01:29 PM	#2
Greg Boston Wrangler Join Date: Oct 2003 Location: DFW area, TX Posts: 6,117 Images: 1	I would try a teflon based spray such as 'Triflow'. I used to use that on the steel guide rails for printer heads and it works great. -gb-