|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
February 8th, 2016, 12:58 AM
|
#1 |
|
Major Player
Join Date: Nov 2007
Location: San Diego, CA
Posts: 240
|
Is 14.4 volts OK for 5 volt monitor?
I've got a Marshall V-LCD51 5" monitor that has a 5v marking on it. The instruction manual says it takes anywhere from 5v to 12v. I want to get a Swit D-Tap 14.4 volt battery, which is stated to work with my camera. If I plug my 5 volt monitor into the 14.4 volt D-Tap connector, could that damage the monitor?
|
|
|
|
February 8th, 2016, 12:13 PM
|
#2 |
|
Regular Crew
Join Date: Dec 2011
Location: Brownsville, OR
Posts: 116
|
Re: Is 14.4 volts OK for 5 volt monitor?
I don't have direct experience with that setup, but generally speaking you don't want to exceed the rated voltage. Over rated amperage is ok since it just draws what it needs.
|
|
|
|
|
February 8th, 2016, 12:34 PM
|
#3 |
|
Major Player
Join Date: Nov 2007
Location: San Diego, CA
Posts: 240
|
Re: Is 14.4 volts OK for 5 volt monitor?
Thanks Stephen. Based on your advice, plus what others have told me, I'm going to skip the D-Tap idea, and just use the small battery made for the monitor.
|
|
|
|
|
February 10th, 2016, 02:55 PM
|
#4 |
|
Trustee
Join Date: Jan 2006
Location: New York, NY
Posts: 1,267
|
Re: Is 14.4 volts OK for 5 volt monitor?
A straight cable would potentially damage the monitor. You would want to get a special cable with an inline transformer to convert the voltage from 14.4 volts down to the rated range.
|
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
