Vegas 13 SLOW render at DVinfo.net

Ryan Laytart · April 30th, 2014, 11:08 AM

I've upgraded from Vegas 9 to 13, and the render time is ridiculously slow in 13. The same project that renders in 10 minutes in version 9 is now taking an hour and 10 minutes. I've checked all the settings, and they're identical.

Any ideas?

Dan Herrmann · April 30th, 2014, 11:32 AM

Without knowing your set up I am guessing the new software 13.0 rely on the GPU more than 9.0 did.

Ryan Laytart · April 30th, 2014, 11:48 AM

Another issue I was having, but have now resolved, was a problem with the border plug-in. The border was not binding correctly to the floating event (would only bind to top and bottom, but would default on the sides, leaving a transparent area on either side).

Upon disabling GPU acceleration, that issue is resovled, somehow.

My main computer specs are:
Windows 7 64bit
Six-core i7-3930K @3.20GHz
10gb memory
Nvidia GeForce GT 530

Ryan Laytart · March 16th, 2015, 09:26 AM

I'm still having the same problem with 13. I bought the upgrade, last Summer, and it has essentially been a digital paper-weight. A lengthy support run-around with the Sony team proved to be unfruitful. It's as though Vegas 13 completely ignores my six core i7 processor.

Has anyone else had this problem?

Jeff Harper · March 16th, 2015, 11:41 AM

No. As a last resort have you reformatted your hard drive and reinstalled windows?

I install Vegas before anything else after installing windows and getting everything set up.

Ryan Laytart · March 16th, 2015, 03:21 PM

That definitely IS a last resort. Not prepared to go through re-installing everything, as Vegas 9 is still doing the job. Some of the Vegas 13 features look useful, so it'd be nice to use it. I was just hoping someone else had experienced the issue.

George Palmier · March 18th, 2015, 07:22 AM

Are you choosing "Render using CPU only"? If not try to render in this way

Duane Adam · March 18th, 2015, 08:52 AM

I have a similar setup and 13 renders quickly on my computer. I have maximum number of rendering threads set at 4, seem to remember any less would cause slow renders.

Jeff Harper · March 19th, 2015, 09:11 AM

Read this thread below. His problem was not the same as yours but I wonder if you were to try uninstalling all Vegas Plug ins, uninstalling 13, then reinstalling 13 and your plugins if it would help.

http://www.dvinfo.net/forum/what-hap...-pro-13-a.html

Based on my past experience, a bad install of Vegas can be tough to figure out. I just start with a clean hard drive and go from there, always seems to fix things. In your case, you don't need it badly enough to go to all that trouble so maybe above idea might help.

Ryan Laytart · March 20th, 2015, 03:17 PM

Quote:

Originally Posted by George Palmier

Are you choosing "Render using CPU only"? If not try to render in this way

I don't actually see this option. Am I missing it, somewhere?

I will try your suggestion about plug-ins and re-installs, Jeff.

Duane, I have mine set at 12... but 12 cores is a result of hyperthreading. Perhaps setting it to the actual physical 6 cores will make a difference. I'll try it and get back with you.

Duane Adam · March 23rd, 2015, 11:07 AM

If it's slow at 12, will probably be slow with less. Mine was crashing at 12 and reducing the number of threads seemed to fix that while still rendering reasonably fast.

Ryan Graves · May 28th, 2015, 10:32 AM

Whenever I render a video file of AVCHD footage in Vegas Pro 12 to a DVD Architect-friendly file or an MP4 file using GPU Acceleration with my NVidia GeForce GTX980, the video will stop rendering at some point in the video, at a black screen. There's nothing wrong with my card, it's brand new. In fact Vegas used to do this with my old card as well, a GTX280. Does anyone know if I need any special settings or something in order to make GPU acceleration work properly?

Thanks,
Ryan Graves
Seattle Wedding Videography
Wedding Video | Seattle, WA Wedding Videographer

Jeff Harper · May 28th, 2015, 04:21 PM

The only solution I know of is to turn off GPU acceleration. Has always been a useless feature for me, never worked with my PC configuration.

Ryan Graves · May 28th, 2015, 04:31 PM

MAN that's frustrating! Really??? This has been th same case with Pro 11, Pro 12, and now Pro 13. Can't believe that they haven't fixed this yet. My GPU renders LIGHTNING quick when it's on...but it just always stops at some point in the render at a black screen, saying 0% rendered, and I have to try it again and hope for the best. The alternative is using my i7 chip which is fine, but it hogs my whole computer in the meanwhile.

Bruce Phung · May 29th, 2015, 09:26 AM

Can't help the op but I want to share. I have no issue with 11, 12 and now 13. Any one of you still remember the Sony Release Project Benchmark. A lot layers and heavily FX and a lot of video tracks. This benchmark will test how well your system perform. Here is my sample.

https://vimeo.com/home/myvideos

April 30th, 2014, 11:08 AM	#1
Ryan Laytart Regular Crew Join Date: Dec 2005 Location: Temperance, MI Posts: 86	Vegas 13 SLOW render I've upgraded from Vegas 9 to 13, and the render time is ridiculously slow in 13. The same project that renders in 10 minutes in version 9 is now taking an hour and 10 minutes. I've checked all the settings, and they're identical. Any ideas?

April 30th, 2014, 11:32 AM	#2
Dan Herrmann Regular Crew Join Date: Oct 2006 Location: villa park CA Posts: 81	Re: Vegas 13 SLOW render Without knowing your set up I am guessing the new software 13.0 rely on the GPU more than 9.0 did.

April 30th, 2014, 11:48 AM	#3
Ryan Laytart Regular Crew Join Date: Dec 2005 Location: Temperance, MI Posts: 86	Re: Vegas 13 SLOW render Another issue I was having, but have now resolved, was a problem with the border plug-in. The border was not binding correctly to the floating event (would only bind to top and bottom, but would default on the sides, leaving a transparent area on either side). Upon disabling GPU acceleration, that issue is resovled, somehow. My main computer specs are: Windows 7 64bit Six-core i7-3930K @3.20GHz 10gb memory Nvidia GeForce GT 530

March 16th, 2015, 09:26 AM	#4
Ryan Laytart Regular Crew Join Date: Dec 2005 Location: Temperance, MI Posts: 86	Re: Vegas 13 SLOW render I'm still having the same problem with 13. I bought the upgrade, last Summer, and it has essentially been a digital paper-weight. A lengthy support run-around with the Sony team proved to be unfruitful. It's as though Vegas 13 completely ignores my six core i7 processor. Has anyone else had this problem?

March 16th, 2015, 11:41 AM	#5
Jeff Harper Inner Circle Join Date: Jun 2005 Location: Cincinnati, OH Posts: 8,425	Re: Vegas 13 SLOW render No. As a last resort have you reformatted your hard drive and reinstalled windows? I install Vegas before anything else after installing windows and getting everything set up. __________________ "The horror of what I saw on the timeline cannot be described."

March 16th, 2015, 03:21 PM	#6
Ryan Laytart Regular Crew Join Date: Dec 2005 Location: Temperance, MI Posts: 86	Re: Vegas 13 SLOW render That definitely IS a last resort. Not prepared to go through re-installing everything, as Vegas 9 is still doing the job. Some of the Vegas 13 features look useful, so it'd be nice to use it. I was just hoping someone else had experienced the issue.

March 18th, 2015, 07:22 AM	#7
George Palmier Regular Crew Join Date: Mar 2006 Location: Malta Posts: 96	Re: Vegas 13 SLOW render Are you choosing "Render using CPU only"? If not try to render in this way

March 18th, 2015, 08:52 AM	#8
Duane Adam Major Player Join Date: Dec 2006 Location: Gilroy, CA Posts: 398	Re: Vegas 13 SLOW render I have a similar setup and 13 renders quickly on my computer. I have maximum number of rendering threads set at 4, seem to remember any less would cause slow renders.

March 19th, 2015, 09:11 AM	#9
Jeff Harper Inner Circle Join Date: Jun 2005 Location: Cincinnati, OH Posts: 8,425	Re: Vegas 13 SLOW render Read this thread below. His problem was not the same as yours but I wonder if you were to try uninstalling all Vegas Plug ins, uninstalling 13, then reinstalling 13 and your plugins if it would help. http://www.dvinfo.net/forum/what-hap...-pro-13-a.html Based on my past experience, a bad install of Vegas can be tough to figure out. I just start with a clean hard drive and go from there, always seems to fix things. In your case, you don't need it badly enough to go to all that trouble so maybe above idea might help. __________________ "The horror of what I saw on the timeline cannot be described."

March 23rd, 2015, 11:07 AM	#11
Duane Adam Major Player Join Date: Dec 2006 Location: Gilroy, CA Posts: 398	Re: Vegas 13 SLOW render If it's slow at 12, will probably be slow with less. Mine was crashing at 12 and reducing the number of threads seemed to fix that while still rendering reasonably fast.

May 28th, 2015, 10:32 AM	#12
Ryan Graves New Boot Join Date: May 2015 Location: Seattle Posts: 14	Re: Vegas 13 SLOW render Whenever I render a video file of AVCHD footage in Vegas Pro 12 to a DVD Architect-friendly file or an MP4 file using GPU Acceleration with my NVidia GeForce GTX980, the video will stop rendering at some point in the video, at a black screen. There's nothing wrong with my card, it's brand new. In fact Vegas used to do this with my old card as well, a GTX280. Does anyone know if I need any special settings or something in order to make GPU acceleration work properly? Thanks, Ryan Graves Seattle Wedding Videography Wedding Video \| Seattle, WA Wedding Videographer

May 28th, 2015, 04:21 PM	#13
Jeff Harper Inner Circle Join Date: Jun 2005 Location: Cincinnati, OH Posts: 8,425	Re: Vegas 13 SLOW render The only solution I know of is to turn off GPU acceleration. Has always been a useless feature for me, never worked with my PC configuration. __________________ "The horror of what I saw on the timeline cannot be described."

May 28th, 2015, 04:31 PM	#14
Ryan Graves New Boot Join Date: May 2015 Location: Seattle Posts: 14	Re: Vegas 13 SLOW render MAN that's frustrating! Really??? This has been th same case with Pro 11, Pro 12, and now Pro 13. Can't believe that they haven't fixed this yet. My GPU renders LIGHTNING quick when it's on...but it just always stops at some point in the render at a black screen, saying 0% rendered, and I have to try it again and hope for the best. The alternative is using my i7 chip which is fine, but it hogs my whole computer in the meanwhile.

May 29th, 2015, 09:26 AM	#15
Bruce Phung Major Player Join Date: Dec 2009 Location: Rochester,NY USA Posts: 285	Re: Vegas 13 SLOW render Can't help the op but I want to share. I have no issue with 11, 12 and now 13. Any one of you still remember the Sony Release Project Benchmark. A lot layers and heavily FX and a lot of video tracks. This benchmark will test how well your system perform. Here is my sample. https://vimeo.com/home/myvideos

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search