Ah. Well, I've always left the beachtek ok there, regardless of whether it gets used or not.

So, according to my tests, it seems that if I want to get my cam to max out when the mixer does (according to Ty), I actually need to set the tone higher, not lower. So, equating the 0 tone on the mixer to -20 on the cam causes the cam, no matter how loud I get, to max out at about -6; it simply won't go any higher without turning up the cam's pots. If I set 0 tone to -12, though, then the cam maxes out at -2 or so, about where ty said the peaks should be. I guess if I did it between -20 and -12, it would all work out. Or, if instead of setting the mixer's master pot to 0 for tone, I could set that lower as well.