NTG-1 vs. NTG-3 vs. AT897
OK, I've looked at over 9,000,000,000,000,000 post and I'm still confused on what microphone to buy.
I have a XH-A1 and currently shoot corporate events. Hopefully soon I'll be shooting shoe-string-budget short films. I have a heard good things about the NTG-1 and AT897 microphones and love the price, but I'm wondering if it might make sense to wait and increase my budget for the NTG-3. I'm assuming the NTG-3 alone to be around $600 bucks and I was wondering if my money would be better spent on the NTG-1 or AT897 and also get some accessories like a boom pole, windscreen, cables, etc. So what's your vote? Should I go the NTG-1 or AT897 route with accessories and money left over. Or should I go the NTG-3 route and spend closer to $900 when all the accessories have been purchased. By the way, does anyone have any hands on experience with the NTG-1 and the AT897? I'd love to hear a comparison from users. Thanks! |
Hi Scott
I have both the AT897 and the NTG2 (same basic mic as the NTG1)... My take on them... Build quality is better on the AT, nicer finish, everything more polished..ie the screw thread is smoother. small details... Sound wise the Rode is hotter, so I find better on a boom... it gives excellent results in this way.. better than the AT.. I found on a boom I was for ever having to increase the audio in post with the AT, but it did have a nicer tone... The AT I find is better on camera... in situations when I want just ambient audio.. it has less handling noise too when used in a shock mount on camera. It is my basic on camera mic now with a Sony Z1. The Rode is my Boom mic... Regards Gareth |
Very helpful info, thanks for the reply.
Keep it coming folks, this forum is great! |
I recently bought the Audio Technica 875R. It is very nice and sounds good. I think it is more veratile than the other mics because of it's small size. It works well on both the camera and on a boom:
http://www.bhphotovideo.com/c/produc...r_Shotgun.html This mic received a good evaluation in the recent review of several shotguns here. It requires phantom power and will not run on a battery. It is also cheaper than the other two mics you mention. |
So what do you guys think? NTG-1 or AT897 or wait for the more expensive NTG-3?
|
Quote:
|
OK so I've narrowed things down. I've been looking at some of these kits and I think I'll go with the NTG-2 or the AT897.
Check out the kits: NTG-2: http://www.bhphotovideo.com/c/produc...icrophone.html FOR: $599 AT897: http://www.bhphotovideo.com/c/produc...icrophone.html FOR $599 What would you pick? It's the same kit for both so it's a choice between the NTG-2 or the AT897. I'm wondering if I'll ever need the battery backup on the NTG-2 and AT897. Would I be better off with the NTG-1 and save some length and weight? Thanks! |
Quote:
|
Dang, this is a hard choice. I wonder which one has less handling noise? Any other opinions?
|
Which direction did you go ???
Scott,
I have an NTG-1 from a while ago. I used it typically with my XH-A1 but now have just stepped into trying the HDSLRs. The G2 continues to be great, but I think I, like you, am probably going to do more booming. Did you end up with an actual verdict? Do you think my NTG-1 will do the trick for a while? Thanks ... |
I ended up buying the AT897. Super happy, no problems. Either the AT897 or the NTG-2 would have been a great choice. The NTG-3 I hear is superub.
If I'm correct I think the NTG-1 is phantom only so you will have to have some sort of a power supply running the mic on your HD DSLR. The NTG-2 and the AT897 can run either phantom or internal AA battery. Good luck! |
I just won an NTG -3 in the DVC/UWOL challenge from Guy Cochran and DVCreators.net, and I tried it briefly for the first time just the other day. I was amazed at how different and sweeter ths sound seemed to be compared to my NTG 2 or my Sennheiser ME66. This piece from vimeo is not even done with care, but you will get a feel for the mic.
|
Hey Chris,
I'm glad to see that the prizes all arrived safe and sound! Thanks for making the video too. Brandon, The RODE NTG-3 and the Sennheiser MKH-416 sound very, very similar, yet the cost is dramatically lower on the RODE unit. I have a sample of the 416 compared directly to the 897. So, if you'd like to hear the AT-897, the 416, and the NTG-1 (which sounds like the NTG-2), I have them all in the same environment fed directly into a camera in a studio in these examples. DVeStore’s Shotgun Shootout at DVcreators.net The 416 has a slightly tighter pattern, which you can see here The AT875r at the price is a very good contender. It boils down to how much you want to spend and how you'll be using the mic. If it's just going on the camera, then go cheap. If you'll be using a boom op, consider adding a mixer too. I'd rather have something like a SignVideo ENG44 mixer, wind protection and a decent shotgun rather than just a pricey shotgun by itself. The mixer, may or may not make your mic sound better, but at least you'll be able to control the levels properly which will result in a better track in varying situations. This is the 416 as well... |
So the NTG-1 May Suffice?!?
Scott/Chris/Guy ...
I appreciate the insight, links, and video. I actually have the NTG-1 (purchased from the DVeStore I might add - thanks Guy :), and I think I'll give it a go. I have the Zoom H4n so the phantom power there I think should allow me to at least be capable with that mic with regard to testing. I didn't know if there may be a certainty out there that suggests it might be inadequate and an upgrade to the NTG-3 was a must do ... it'd be nice to save the $600 and maybe pay attention to accessories!! My application will be both on camera and stationary shoots (e.g., interviews/panels/indoor scenes). |
Mixer ?
Guy/Scott ...
Though it's months later, I took a look at the ENG44 mixer and it looks as though it'd be a great compliment to any mic. My question is this ... would the ENG44 be a critical purchase if the Zoom H4N that I currently have has the capability of supplying phantom power - especially if I am looking right now at a single mic on camera (or on a stand)? (I can certainly see the benefits with the second output for an operator). Thanks! --Brandon |
The ENG44 has been a great tool for me, with my 5D and T2i rigs. For shoots where I can swing a boom operator, double system sound has become my preference. In fact, I Velcro a simple Tascam DR-07 to it, feeding that recorder with a short miniplug from audio out of the ENG44, and I can also record to the 5D running Magic Lantern using a simple XLR adapter, in my case an old beachtech without amp, or the Juiced Link CX-231. Often, the sound in the camera is as good as what goes to the recorder, so I don't have to match it up. But if something has goofed up at the camera, I have the back up in the DR-07.
|
Double Sound
Thanks Chris ... I appreciate the prompt insight! I'll be looking into the mixer alongside the mic itself. All the best,
|
Quote:
|
All times are GMT -6. The time now is 08:30 PM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network