It's a tad big for the Mix Pre (Koala1) and the harness is about the same, extreme overkill.

Thanks
Bryan

Brian - I'm working on a design for a mount that will hold mixpre without any additional holes drilled into it's case. Plug and play if it all works out OK. It will be held in place with small screws that will fit into the 2 small slots.

Right now I'm trying to figure out how to move a 800 mill into my shop so I can built cool stuff out of metal! -Greg.

Greg
Don't forget, I use a matte box with support rods. Also, if I'm using the Sound Devices 302, a boom and/or radio mics, i'll still need the chest pack.

I use double-sided velcro through the slots of the
MixPre hooked onto my belt or trouser belt loops,
so that it is at my side.
Five-foot cables run to the cam.

I'm going into TO and looking at some rock climbing chest harnesses. they're light and definetly not contrictive. You can actually buy the tubular webbing and fittings and custom cook one.

http://www.mec.ca/Products/product_detail.jsp;jsessionid=ARphOvjQjEdE0VKXfkqUT8JMjM8ggwalIUSZAZgV1mIkhDcNRp5t!705347564!1709189 44!2003!7002!-297985067!170918972!2003!7002?FOLDER%3C%3Efolder_id=667251&PRODUCT%3C%3Eprd_id=335103&bmUID=10832878 41743