DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   All Things Audio (https://www.dvinfo.net/forum/all-things-audio/)
-   -   Studio monitor speakers (https://www.dvinfo.net/forum/all-things-audio/528840-studio-monitor-speakers.html)

Jay Massengill June 23rd, 2015 07:37 PM

Re: Studio monitor speakers
 
Going from the stereo 3.5mm out of the computer to the unbalanced RCA connectors of the Senal ASM-3 monitors would be the simplest method. And the specs say the pair comes with a cable to do this included.

As has been discussed here lately in the forum, the built-in audio outputs of most computers often have a lot of noise.

I didn't know if you had a USB audio interface or other equipment like a mixer planned for use between the computer, the monitors and any other audio sources you might be using.

Kathy Smith June 24th, 2015 03:53 AM

Re: Studio monitor speakers
 
Quote:

Originally Posted by Jay Massengill (Post 1890417)
Going from the stereo 3.5mm out of the computer to the unbalanced RCA connectors of the Senal ASM-3 monitors would be the simplest method. And the specs say the pair comes with a cable to do this included.

As has been discussed here lately in the forum, the built-in audio outputs of most computers often have a lot of noise.

I didn't know if you had a USB audio interface or other equipment like a mixer planned for use between the computer, the monitors and any other audio sources you might be using.

I don't have anything else planned to use. No mixer or anything like that. So can I plug in the speakers directly to my computer?

Jay Massengill June 24th, 2015 06:10 AM

Re: Studio monitor speakers
 
Yes, you should be able to connect these powered speakers directly into the audio out of your computer using a standard 3.5mm stereo to 2x RCA cable.

The specs don't say how long the included cable is, but you can easily find a longer or shorter one if needed.

What kind of computer are you using?

Kathy Smith June 24th, 2015 07:47 AM

Re: Studio monitor speakers
 
Quote:

Originally Posted by Jay Massengill (Post 1890452)
Yes, you should be able to connect these powered speakers directly into the audio out of your computer using a standard 3.5mm stereo to 2x RCA cable.

The specs don't say how long the included cable is, but you can easily find a longer or shorter one if needed.

What kind of computer are you using?

But if I connect them directly to the computer will I have issues with noise? I thought you suggested using an external interface.
I'm using Mac Pro.

Richard Crowley June 24th, 2015 07:56 AM

Re: Studio monitor speakers
 
Please note that virtually all sound interfaces INSIDE computers (no matter what brand or model) are noisy. Some much worse than others, but many are usable depending on your tolerance of low-level "digital hash" The standard method of getting around this endemic problem is to use an external (USB) sound interface. Even something as cheap and simple as a Behringer UCA-222 can be a vast improvement over this noise problem in many computers.

Please note that you should actually TRY the speakers with the sound output of your computer FIRST before you can know if your particular combination will be a problem or not.

Rick Reineke June 24th, 2015 08:11 AM

Re: Studio monitor speakers
 
It 's nice to a one of your monitor sets w/ a sub for checking infrasonic content that normal speakers won't reproduce, like LF rumble, plosives, ect.. Like microphones, one (set) of speakers is rarely adequate for broadcast work.. I mix with four sets; large, small nearfields and reference cubes, and a (in my case Auratones) and 'typical' home stereo speakers. Compromises are often necessary to sound good on all.

I too would recommend going to B&H to audition monitors. Monitors are like headphones, everyone's got their favorites. A subjective cthoice at best.

FWIW, I have a set of Equator D5's that sound good (IMO). Good deal as well, around $300 for two. They are sold directly to the buyer, so there's no added distributor/dealer costs). Designed by Ted Keffalo. Prior to Equator, Ted co-founded Event..

Jay Massengill June 24th, 2015 10:56 AM

Re: Studio monitor speakers
 
I agree with the "Try It and Listen" advice. You have nothing to lose.

If you need to do anything else beyond the simplest monitoring, or if you do have noise problems, then I do recommend an external interface.

It's an inexpensive way to gain a lot of flexibility in connecting to and from your computer, as well as getting lower noise and more durable connectors than 3.5mm stereo mini.

Kathy Smith June 24th, 2015 11:53 AM

Re: Studio monitor speakers
 
Thank you. The speakers are coming tomorrow. I will report back after I listen how they sound.

Jonathan Levin June 24th, 2015 02:10 PM

Re: Studio monitor speakers
 
Great info.

If the line out or internal audio out is kind of crappy, would this work?

I have an M-Audio Fastrack Pro USB audio interface that I was using to record guitar stuff. I believe that I can choose the M-Audio as an output source from all of my audio in the preferences on the Mac. The M-Audio has 4 RCA outputs on the back, as well as two TRS 1/4" outputs.

Would one of these be a better option? I'm guessing that one of the TRS would go into the left speaker and the other to the right, although they are not labeled on the outputs left and right.

Jonathan

Steven Digges June 24th, 2015 04:22 PM

Re: Studio monitor speakers
 
That is correct Johnathan. That Fast Track Pro is exactly the kind of USB interface device they have been talking about here. It will not only allow you to feed your speakers USB instead of 1/8 mini it will also work as an analog input device.

You are Mac so you should be OK. My Fast Track worked fine on XP but it is buggy on Windows 7. But that should be a new thread.

On near field monitors here is my 2 cents. I have nine speakers hooked up to my editing rig so I can tast my mix several ways. Recently I wanted a new pair of small light monitors I could hook up to an editing lap top I use on sets for client review. It is bad form to hand a client sweaty cans ;-)

For $200.00 I found these and was pleasantly surprised by how good they sound for such a low price:

http://www.bhphotovideo.com/c/product/999888-REG/presonus_e4_5_hi_def_2_way_4_5_nr_fd.html
While I was researching in that range I found a lot of bad reviews about the M-Audio near fields. Apparently they put out one or two models that had power amps failing regularly right after warranty expiration...ouch.

Steve

Jonathan Levin June 24th, 2015 04:55 PM

Re: Studio monitor speakers
 
Hi Steve.

I've always had issues with the M Audio, mostly with input levels. I'm also pretty sure Avid took over the brand. Finding the latest drivers for it is always a challenge and I have pretty much resigned myself that it won't work ever again with some not to distant OS update.

I am quite excited and wiggley at Richards review of the JBLs, and for once aomething thats only a few hundred dollars instead of thousands which I thought you had to spend for decent monitors!

And yes, my Sony 7506 headphones is what I now use for audio grading.

Currently, my "monitor" are Logitech something or other that consist of a sub, and 5 little desktop speakers.

Cheers.

Jonathan

Kathy Smith June 26th, 2015 05:42 PM

Re: Studio monitor speakers
 
I got my Senal speakers and they sound great! I'm really happy with them. I do not have any problem with noise plugging them in directly to my computer. So I think I'm good!

John Willett June 27th, 2015 06:20 AM

Re: Studio monitor speakers
 
Quote:

Originally Posted by Kathy Smith (Post 1890334)
Can you guys recommend a set of small studio monitor speakers that perform well in small places? I was looking at Genelec 8020c but they are a bit out of my budget. I would prefer to spend around $500 for two and the Genelec ones are over $500 for both. Is there anything out there that's within my budget?

On that budget I would go for the Equator D5 - only $399.99 in the USA - excellent quality for the price and better than many more expensive models.

Also - they are co-axial monitors which have an excellent stereo image with depth.

John Willett June 27th, 2015 06:23 AM

Re: Studio monitor speakers
 
Quote:

Originally Posted by Rick Reineke (Post 1890464)
FWIW, I have a set of Equator D5's that sound good (IMO). Good deal as well, around $300 for two. They are sold directly to the buyer, so there's no added distributor/dealer costs). Designed by Ted Keffalo. Prior to Equator, Ted co-founded Event..

Yes - I posted before I read this.

The D5 is the only sub-$1,000 monitor worth getting, IMHO, other than the more expensive D8 (which is also under $1k).

Steve House June 27th, 2015 07:06 AM

Re: Studio monitor speakers
 
Quote:

Originally Posted by Jonathan Levin (Post 1890415)
This is very interesting to me as well. Would the 1/8" line out from a mac pro to the balanced 1/4" in on the speakers be best?

Maybe I need to start a new thread.

J

Likely to be a level mismatch there. Computer 1/8 line outs are -10dBv consumer line while I would expect a balanced 1/4 TRS to be +4dBu studio line level.


All times are GMT -6. The time now is 06:45 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network