Re: getting reverb out.
 

Jim, did you use izo DeReverb? What settings did you use?

G

Re: getting reverb out.
 

It was Rx6
There were choices on what u want to correct
I picked deverb

Re: getting reverb out.
 

I've got a full copy of RX6. If you send me your reverb removal settings I will apply them for you and save the file. But I must have an original .wav file of the audio and not your Vimeo copy.

(Audio compression throws away information and as a result performing audio repair feels like you are working with mud. An original uncompressed copy of the audio is absolutely essential.

Andrew

Re: getting reverb out.
 

I can do that I don't remember doing any adjusting once I click that Deverb on the right side of choices,at the top I hit the learn button and then it basically went through and did what it was supposed to do but I wasn't able to save it.
How shall i send the wav file?

Re: getting reverb out.
 

Jim, give me/us a SCREENGRAB of your settings and prior to you delivering an uncompressed, I'd also like to ave a go too.

G

Re: getting reverb out.
 

I will send you too short samples of different issues to see if you can fix it first if thats ok.
It's late here and I'm going to go to bed is it okay if I send them tomorrow just get me an email address or I could do Dropbox
My email is
Jimstamos@sbcglobal.net
Thx

Re: getting reverb out.
 

Ok will do tomorrow

Re: getting reverb out.
 

Here's mine thus far in iZo RX6 ADVANCED:

http://www.dvinfo.net/forum/attachme...1&d=1528698336

Re: getting reverb out.
 

Hi Jim - Just invited you to share a DB Folder.

G

Re: getting reverb out.
 

Dropbox is good. Just export the uncompressed .wav straight from the footage clip and upload.

Andrew

Re: getting reverb out.
 

And now to hear back from Jim regarding the results. Hope it works well.

Andrew

Re: getting reverb out.
 

Hi Andrew. I’ve spent time on it and have had comms with Jim and I’m waiting for his response.

This is what I did:

1] In iZotope I used Spectral Noise removal to reduce the Ambient "mush" to reveal more of the ECHO and rendered out the file.

2] In VegasPro15 Normalised the Volume and applied my Invert Phase method/approach using Track Compression. Exported to iZo

3] Back in iZo I applied DeReverb and created my "First Scan" of the file and saved this as a First Scan Preset and Processed the file.

4] Applied a "Second Scan" of the processed file to 3] above and saved this as a Preset and Processed the file.

Cheers

G

Re: getting reverb out.
 

I spent time on it too. Looks like we're competing.

For bonus points I ran the wind removal filter on the diploma part of the ceremony. :-)

Andrew

Re: getting reverb out.
 

And we’re still waiting for the proverbial Puff of White Smoke to emanate from ......!

G