Hi all,
Was wondering if the HD Analog Component and the HD-SDI output connectors are live simultaneously?

For instance, HD Analog to an onboard monitor, and the Uncompressed HD-SDI to a recording device...


Thanks,
Lonnie

Yes they are.

Thanks Vince...

Have you used it this way?
And is the HD Analog a little soft in the monitor compared to the lcd or does everything look great??

Lonnie

I just plugged them both into monitors at the same time to answer your question. HDSDI into a Marshall and component into a Sony 23" LCD.

They looked fine, although I didn't get real critical and was messing with my Letus at the time.

Vince

I really appreciate the test and your time!

Thanks Vince,
Lonnie

Has anyone successfully taken 10bit 4:2:2 from the EX1 HD-SDI port directly into PremierPro (or any other 10 bit editor) with a hardware card like the V3HD?

I have previewed in FCP the HDSDI through a Kona LHe. As far as capturing, my drives are not set up for uncompressed HD. The preview looks great as does the signal into the Marshall LCD panel.

Vince