Sean Seah
June 5th, 2008, 11:37 AM
Trying to customise a short cable for steadicam use for the RCA output. Where can I find the special 4 pin connector?
|
View Full Version : Where to buy EX1 RCA 4pin Connector Sean Seah June 5th, 2008, 11:37 AM Trying to customise a short cable for steadicam use for the RCA output. Where can I find the special 4 pin connector? Doug Park June 7th, 2008, 11:36 AM Been looking for the same thing for use on a steadicam also. Does anyone know the part number? Bill Ravens June 7th, 2008, 11:56 AM do a google search for EIAJ-04 Christopher Witz June 7th, 2008, 04:17 PM i found mine by googling.... $12 snipped off all but the yellow and then shortened to about 9". works great on my pilot. Ray Bell June 7th, 2008, 04:41 PM removed by poster John Hyland June 8th, 2008, 06:38 AM I'm not finding it through Google. Any other advice. Sean Seah June 8th, 2008, 09:49 AM it is a 4pin connector that is used for the A/V output. One end goes to EX1, the other is the Y-R-W for audio+video. Christopher Witz June 8th, 2008, 10:47 AM here ya go..... http://www.buy.com/retail/product.asp?sku=90117338&listingid=1288545&dcaid=17902 Sean Seah June 9th, 2008, 12:03 AM http://www.bhphotovideo.com/images/largeimages/270215.jpg Photo attached. The 4 pin small black connector is wat I'm looking for. Thks! Dave Blackhurst June 9th, 2008, 01:26 AM OK, isn't that an S-Video plug? If that's the one, Google for 15FS - the actual part is VMC-15FS, and that cable can be had for under $10 on eBay for knockoff chinese ones, just hack the ends. I've bought a few and hacked the other end (the "D" shaped A/V plug) for a LANC adapter for the CX7/SR11... |