Footage of the recent watery madness:

http://www.youtube.com/watch?v=C8eperGDNZ4

Hi
Thank you! Nice shooting and titling!.. I'm curious - what for a tripod do you use?

Were these shot in DV or HDV? I'm also curious about your rendering protocols?

Not that you needed it, but would you recommend some sort of rain gear?

All the best to you out there. The work crews looked fantastic. It's so nice to see people pulling together for a common need.

Chris

I used the legendary Velbon Videomate 607, available for about $69.95 at B&H. Some of the first few shots were handheld.

We actually have nice big Vinten tripods in my production group, but I do so much one-man-banding that I keep scaling down all my gear...

Shot in HDV. Down-res'd in-camera for capture in FCP, rendered out a QuickTime mp4 for YouTube upload.

Finding YouTube a lot more handy these days, with the high quality option.

I have a KATA rain cover but I haven't used it yet.

I used the legendary Velbon Videomate 607, available for about $69.95 at B&H. Some of the first few shots were handheld.

We actually have nice big Vinten tripods in my production group, but I do so much one-man-banding that I keep scaling down all my gear...

Shot in HDV. Down-res'd in-camera for capture in FCP, rendered out a QuickTime mp4 for YouTube upload.

Finding YouTube a lot more handy these days, with the high quality option.

I have a KATA rain cover but I haven't used it yet.What is this high quality option you mention?

Take a video like this:

http://www.youtube.com/watch?v=LrVy_eB7b0I

Note under the "Views" count, it has a link for "watch in high quality". Press the link and, lo and behold, a higher quality version plays.

This option is only available if the uploaded source file is of at least a certain resolution; but it makes YouTube that much more useful for videographers and filmmakers.

my video gets over 10,000 hits in a week and i still don't get a higher quality viewing option... the standard viewing doesn't look all that bad, and actually loads really quick. what encode settings are you guys using? I use .mp4 320x240 15fps de-interlaced.

http://www.youtube.com/watch?v=-11iWENW1iU

my video gets over 10,000 hits in a week and i still don't get a higher quality viewing option... the standard viewing doesn't look all that bad, and actually loads really quick.

http://www.youtube.com/watch?v=-11iWENW1iU

I don't think it has anything to do with how many hits or views you are getting...like I said, the source file has to be of a certain resolution in order for YouTube to give you the option. If you can keep the file size under 100MB try the biggest size and best frame rate you can get away with.

Can you share your output settings? I don't see that option for any of my videos either.

What resolution are you making your videos before you send them to YouTube?

on a website....

"YouTube recommends to use these settings when you upload videos: MPEG4 format, 640x480 resolution, MP3 audio and 30 frames per second."

here's more...

Flash Settings(flv settings): 30fps, 640x480 (you can try 320x240), 9000K(9M) video bitrate, *100 video quality, 128 stereo 44k audio bitrate, .flv format, key frame every 3 seconds, buffer size 3 seconds.

Great footage, hope things dry out soon.

on a website....

"YouTube recommends to use these settings when you upload videos: MPEG4 format, 640x480 resolution, MP3 audio and 30 frames per second."

here's more...

Flash Settings(flv settings): 30fps, 640x480 (you can try 320x240), 9000K(9M) video bitrate, *100 video quality, 128 stereo 44k audio bitrate, .flv format, key frame every 3 seconds, buffer size 3 seconds.I've tried what YouTube recommends. I don't get the high resolution option. We'll see what the original poster uses.

I've tried what YouTube recommends. I don't get the high resolution option. We'll see what the original poster uses.

I just upload the highest quality file I can get away with. Since YouTube displays videos at what looks to be 480x360, uploading a source file of 320x240 is guaranteed to be upscaled; and that's in addition to any hit your video's resolution will take when they re-encode.

So I create them as large as I can, under the 100MB upload limit, and that seems to work. I think the flood video was at least 640x480. I use either the mp4 or H264 codec and AAC audio. Pretty straightforward.

i just tried one at 640x480, no hq option...

The HQ option takes like a day after the original upload to show up. Don't ask me why.

640x480 was a guess- I can't remember what the actual size was. Experiment and you'll figure something out.

PS- I don't work for YouTube, and claim no authority regarding best practices. Best of luck