View Full Version : Timelapse video


Dean Gill
January 13th, 2009, 08:25 AM
Hi,
I recently saw several timelapse videos shot with the 5D MarkII. Are these video clips simply done by speeding up the video with a software or is there an interval recording (video) mode like on the EX-1 where you can shoot at lets say 1 frame per 3 seconds?

Ray Bell
January 13th, 2009, 08:42 AM
I have not seen the footage that you are refering to, but yes you can do both with
this camera....

you can shoot standard 30P footage and slow it down in post and you can also set the
camera up to shoot incremental shoots at a slower duration...

To do the later you need to have the RS-80N3 remote to program the sequence

Dean Gill
January 13th, 2009, 08:53 AM
Thanks Ray!
Here is a link to one of these videos :
Flickr (http://www.flickr.com/photos/barnezy/3096847278/)

Ray Bell
January 13th, 2009, 09:38 AM
Looks cool.... may have to digg out my car mount :-)

That video is obtained with the remote...

Bill Petropoulos
January 13th, 2009, 09:53 AM
I think using still images works best.
Especially for getting streaks of light with slow shutter.
Here is some timelapse footage I did with my Canon 30D.

Timelapse Compilation on Vimeo (http://www.vimeo.com/2798284)

I can't wait to do some with my 5D MKII.


-Bill

Ray Bell
January 13th, 2009, 10:30 AM
Bill can you tell us the workflow to get this done... they look great...

Bill Petropoulos
January 13th, 2009, 11:30 AM
I do it all in Final Cut Pro.
Import the folder of images, Drag folder to timeline...and render............
I set the timeline settings to the same res as the photos, this gives you flexibility in framing.

Then export to format of choice.

I've heard it's possible to do in Motion as well, but I never figured out how.


-Bill

Ray Bell
January 13th, 2009, 02:49 PM
what frame rate do you use when you take the shots....

Matthew Roddy
January 13th, 2009, 03:12 PM
I've been curious about Timelapse too and found the following good info:
Timescapes (http://www.timescapes.org)
and
Time Lapse in HD on Vimeo (http://vimeo.com/timelapseinHD)

They are helping me - maybe you too?

Jay Birch
January 14th, 2009, 07:17 AM
I have been using this

Canon TC-80N3 Timer Remote Control for EOS 5D, D30, D60, D10, 1D, 1V & 20D SLR Cameras | BuyDig.com, The Internet's Digital Superstore (http://www.buydig.com/shop/product.aspx?omid=103&ref=froogle&utm_source=Froogle&utm_medium=cpc&utm_campaign=CNTC80N3&sku=CNTC80N3) (cheap on ebay)

I just test a few images (shutter, f-stop etc) untill I get the right look, then use the remote to fire off as many shots as I need. I have been doing alot of night shots around NY last week and they came out great.... having 21mpx to play with is amazing for cropping, panning, zooming etc

Ray Bell
January 14th, 2009, 12:32 PM
Jay, Thanks for posting this as I put the wrong part number in my post above...

Keith Paisley
January 14th, 2009, 12:57 PM
I have been using this

Canon TC-80N3 Timer Remote Control for EOS 5D, D30, D60, D10, 1D, 1V & 20D SLR Cameras | BuyDig.com, The Internet's Digital Superstore (http://www.buydig.com/shop/product.aspx?omid=103&ref=froogle&utm_source=Froogle&utm_medium=cpc&utm_campaign=CNTC80N3&sku=CNTC80N3) (cheap on ebay)

I just test a few images (shutter, f-stop etc) untill I get the right look, then use the remote to fire off as many shots as I need. I have been doing alot of night shots around NY last week and they came out great.... having 21mpx to play with is amazing for cropping, panning, zooming etc


The cheap ones on e-bay are not official Canon products. Has anybody tried any of these knock-offs and had good results they can share? I realize the device is rather simple, so as far as I'm concerned building a functional clone for well under than $50 should be no problem at all, but reassurances are always good.

Mike Hannon
January 14th, 2009, 01:27 PM
The cheap ones on e-bay are not official Canon products. Has anybody tried any of these knock-offs and had good results they can share? I realize the device is rather simple, so as far as I'm concerned building a functional clone for well under than $50 should be no problem at all, but reassurances are always good.

I've just ordered one. I'll let you know how I get on!

Jay Birch
January 15th, 2009, 10:26 AM
I have one of the clones... works fine.