Abraham Texidor Sr.
August 18th, 2010, 06:51 PM
Is it possible to get 16:9 video thru A/V out on the NXCAM? It seems that the camera is edge cropping everything to 4:3 video.
View Full Version : Question about A/V out on NXCAM Abraham Texidor Sr. August 18th, 2010, 06:51 PM Is it possible to get 16:9 video thru A/V out on the NXCAM? It seems that the camera is edge cropping everything to 4:3 video. Tom Hardwick August 19th, 2010, 01:25 AM It would never cross my mind that 16:9 wasn't available on the A/V pins, so it might suggest you've a setting wrong in the camera or the TV. Arkady Bolotin August 19th, 2010, 03:23 AM Is it possible to get 16:9 video thru A/V out on the NXCAM? It seems that the camera is edge cropping everything to 4:3 video. When signals from the NX5 are output through VIDEO OUT jacks the output resolution is only 480i. In such case, if your video was recorded in 16:9, you may try switching a down convert type from EDGE CROP to LETTER BOX (16:9). Ron Evans August 19th, 2010, 06:41 AM Page 77 in your manual. Ron Evans |