Anyone know how the Zeiss ZF and compact primes compare to the older but more expensive Zeiss standard primes in optical quality?

Obviously i can compare f stops and am guess there is less breathing on the standards. The standards are generally older and that could affect optical quality - though they are still more expensive as well.

Is it true that ZF and ZF.2 lenses are identical except for electronics compatibility?

The Zeiss Standards are T2.1 and were a workhorse in the film industry. They shot a ton of films are sharp, a bit warm, and don't breathe much. They sort of don't win in any category by todays standards. They weren't the fastest or most color accurate, but they are sharp and look like 1970's 1980's TV and movies. They were the lower cost lenses once the Super Speeds came out.

I actually like them. Only issue is that buying a set nowadays is weird because the PL vaccum has inflated their price. I see them go for +$20,000, and hell even the old super speed MK II and MkIII's go for almost 35-40K. I feel like a set of CP2's in PL is a safer purchase than Standard speeds, because they dont make the damn things anymore, and eventually geting them serviced will be harder and more expensive. Atleast new lenses will go 20+ years before needing to be totally rebuilt.

Thanks Tim, I'm thinking to go budget altogether and get Duclos ZF's , as well as a few good Nikon Zooms (11-16, 17-35, 24or 28-70, and 80-200) then get a follow focus with a reversing gear. (May even try a cheap 18-200 Nikon for down and dirty running around work because its still supposed to be a sharp lens)

Any suggestions on a good follow focus and mattebox -preferably on a budget? I would have gone to Wayne at shoot 35 but he doesn't have a reversing gear for his follow focus and though he plans one , can't say when. Same for his mattebox as I have a bunch of vertical 4 x5.5 grads and he hasn't made a frame for them. A lot of the less expensive matteboxes don't provided those frames.

Lenny

Any suggestions on a good follow focus and mattebox -preferably on a budget? I would have gone to Wayne at shoot 35 but he doesn't have a reversing gear for his follow focus and though he plans one , can't say when. Same for his mattebox as I have a bunch of vertical 4 x5.5 grads and he hasn't made a frame for them.

O'Connor Obox, and Redrock FF.

Seconded on the O-box--I just bought one last month. There are a few caveats on it but it is overall built very solidly with an intelligent design. The unique addition of the mounting bar on top is perfect for attaching monitors and other components. The O-grips are well made and have some great features when used with the O-box but tragically expensive.

Seconded on the O-box--I just bought one last month. There are a few caveats on it but it is overall built very solidly with an intelligent design. The unique addition of the mounting bar on top is perfect for attaching monitors and other components. The O-grips are well made and have some great features when used with the O-box but tragically expensive.

If you happen to invest in other Oconnor stuff, like Ogrips, the OBOX makes alot more sense. Its ab it heavy to be a standa lone mattebox. but when you attach its accessories, it really becomes somethign more.

Yes it does--it becomes a mounting point for accessories at the front of the camera assembly. Which I've taken to a further level than O'Connor themselves--see attached photo. However, the infuriating part of the design is that not only does it require a hex wrench to attach and remove the O-grips, it's a finicky process that requires explaining and demonstration to each and any assistant that works with it. I've just resigned myself to using the supplied rod mount bar for the O-grips instead of attaching directly to the O-box.

If you are wondering the point of having top rods as well as bottom rod attachment points--more to come as I'm having more parts machined as we speak. But you can also see that rather than wait for O'Connor to come out with side flaps I've had my parts made to use my Chrosziel siders with the O-Box.

(in honor of pending St. Paddy's Day, I feel like referring to the thing as the O'Box!)

The Zeiss Standards are T2.1 and were a workhorse in the film industry. .

Timur, I also loved and worked with the Zeiss Distagons for over 20 yrs. The Super Speeds were harsh by comparison, and the ultra primes did improve on the longer focus throw, though missing some of the romance the older Distagons had. Ultra primes also became big and heavy.

I regret a little in getting the Arri matte box kit when O'Connor told me their follow focus was not ready to ship a month ago. O'Connor's design was refreshing while Arri's lower price MMB-1 seemed flimsy and similar to DSLR inspired Vocas or other similar designs.

Kind of feel there ought to be a balance between price points of camera & accessories. If one wants to go 'budget' then why not the plastic Cokin snap ons? Dirt cheap and you can even slide grads up & down.

I just ordered a couple ZFs, 50mm F1.4 and 85 F1.4. Can the iris can be declicked on these? Also, is the focus rotation direction "a la Nikon" or standard?

Thanks.

Thierry.

Theirry,

Yes they can be de-clicked. Both Duclos and RP Lens do it but you might be able to find a photographic lens repair shop locally that will do a de-clicking for a fraction of the price. Your lenses will rotate the way of photographic lenses, not like cinema lenses.

You can use a follow focus that is flippable or is geared to reverse the knob rotation. ARRI makes a good one. They have it at Abel Cine Tech.

The new Letus follow focus looks interesting. Its looks like an Arri design and is supposed to be reversible for around $600. I've had a Chrosziel with a reverse gear for the last 4 years and its been a workhorse. Costs a lot more but is solid

Nigel is this the Chrosziel follow focus you are using?...

ZGC - Lens Controls/Follow Focus | Chrosziel Follow Focus System, HDV Rig Varilock DV (http://www.zgc.com/webstore.nsf/productsseo/chrosziel_20650s.html)

If so does it do reverse gearing for photo lenses (Nikon and the like)?

Nigel is this the Chrosziel follow focus you are using?...

ZGC - Lens Controls/Follow Focus | Chrosziel Follow Focus System, HDV Rig Varilock DV (http://www.zgc.com/webstore.nsf/productsseo/chrosziel_20650s.html)

If so does it do reverse gearing for photo lenses (Nikon and the like)?

Andrew

I have that Chrosziel. You have to buy a separate gear that reverses it and sitson top of that gear. Just saw the new Petroff that has the reversing system built into it. I got my Chrosziel 4 years ago and its been solid. I like these new systems with it built into it so you can use it also with Cine lens. Its a bit of work to take the revering gear off, so I have a second follow focus for Cine lenses and EFP lenses.

You can see the second gear in the attached photo. Also as we talked about it only can go on one side of the follow focus, so its been a problem with my new Chrosziel Matte box. I have to leave my hood on my 24-70 Tokina so there's enough space between the lens Matte box and follow focus

The Genus Superior FF can also be reversed by mounting the gear box upside down. It's designed to be able to do this and has a reversible bracket.

I compared the ZF.2's to some CP2's and the Sony PL's and there was very little to choose between them optically. Ergonomically the CP2's were clear leaders, with the Sony PL's next and ZF.2's last. I'm looking at adding some ZF.2's to fill in some of the gaps in my lens kit.

NIgel, I noticed you have a Cineroid attached to your F3. Can you get the aspect marker framing lines on it? Also which arm are you using and is it secure enough? My Manfrotto arms does not tighten well and the swaying of the finder is a pain.

Hi Brian,

I trust that you are well.

I have found the Zacuto quick release arms to be excellent for tightening without rotating, and I really like the quick release.

ZicroMount - Zacuto (http://store.zacuto.com/zicromount.html)

Cheers,

Ben

Andrew I have that Chrosziel. You have to buy a separate gear that reverses it and sitson top of that gear. I like these new systems with it built into it so you can use it also with Cine lens. Its a bit of work to take the revering gear off, so I have a second follow focus for Cine lenses and EFP lenses... You can see the second gear in the attached photo. Also as we talked about it only can go on one side of the follow focus, so its been a problem with my new Chrosziel Matte box.

I did some research into the Chrosziel and found a series of video reviews on a bunch of different follow focus units. One of the reviews was on the Chrosziel. In the course of the review/demo they showed how you could put the gear on the other side of the gear box. It was unclear though if the gear would be in reverse motion when you moved the gear ring from one side of the gear box to the other. I was hoping it would. Below is a link to the video review series of follow focus units...

ProVideo Coalition.com: VIDEO: FRESHDV by Matthew Jeppsen & Kendal Miller (http://provideocoalition.com/index.php/freshdv/video/freshdv_follow_focus_system_reviews/)

I had a chance to use the GENUS follow focus yesterday and found there was a noticeable amount of lash (play) in the unit. You may be able to adjust this but it didn't leave me feeling confident about the unit.

I have found the Zacuto quick release arms to be excellent for tightening without rotating, and I really like the quick release.[/url]

I have a Zacuto rig as well but for many the cost is too prohibitive. When you factor in the arm and BOTH of the receiving bits, depending on the size of the arm and what the receiving bits are, you are into it for over 300 bucks and often in the 400 to 500 range.

On a whim I bought the IKAN articulating arm. It is relatively short and has a 1/4" 20 threaded bit on both ends. When you tighten the unit down it is very solid and it is seventy bucks at this point in time and light weight...

Ikan MA206 6" Articulating Arm MA206 B&H Photo Video


I plan on buying a few more to have on hand.

I have used screw threaded arms for years, and I remember from my assisting days that they were slow, unreliable and always worked loose. The Zacuto quick release system solves all of this. It is excellent. Expensive, but will last a lifetime.

Previous to the Zacuto system a couple of the top AC's that I work with had machined their own quick release arms (they just did it for their own benefit and never went into manufacturing). The quick release saves time and hassle on set.

(Also, I am sure the cost will not be an issue for Brian).

The zacuto gear will still be useful in 15 years time, I am sure that the F3 will be old news by then.

You can get rid of all the backlash in the genus superior, but it does me stripping the unit down.