Frank Spangler
March 9th, 2011, 08:41 PM
It was with much trepidation that I headed out with a new camera on a paid shoot without much chance to test it out before my trip. When shooting for a client, I like to know my camera so well that I can find all of the controls blindfolded, and developed my muscle memory to switch my settings without much thought… I should have listened to my instincts and left my new XF300 at home and did my shoot with my trusty XHA1! If you have just picked up your new XF300, or are renting one for the weekend… here are some things to watch out for ….
The LCD monitor
Naïve and trusting as I am, I somehow had faith that for the extra $3500 that I was laying out for this model, over my XHA1’s, that Canon would surely put some of that money towards a monitor that works better for shooting in sunlight. It surely does look better indoors, and I love the way that it can be positioned on either side of the camera, but alas, this monitor is no more useful for determining correct exposure outdoors, then the XHA1. If anything, I find it much worse! Many of the shots of my first couple of days of shooting are badly over exposed… I, know some of you are saying… why didn’t you use the vector scope… I am sure that it is a nice new feature, but not coming from a technical background, it’s just a bunch of squiggly lines to me. I’ll be putting that on my list of things to learn before I head out on the next shoot… But if you are like me and you don’t know how to read the vector scope, and you are headed out on a shoot, just be aware that, under the sun, the monitor is VERY deceiving… The only way that I could get good exposure was to carry a black T-shirt around my neck and use that to drape over the camera to check exposure before every shot.
The On/Off Switch
Much has been written here about the clumsy ON/OFF/Media switch, so I probably don’t need to add much. As it doesn’t affect the quality of the shots, it is an annoyance that I can live with. After about a week of using it, I was able to build up the needed dexterity to successfully turn it to the off position without going to the media mode, almost every time! One thing that I have noticed is that there does not seem to be a battery-saving, auto shut-off after five minutes of non-use, if you leave the camera in the On position. There were several occasions where I pulled the camera out for a quick shot, only to find that I had a dead battery… (He doesn’t like missing shots like that!)
Accidental Button and Switch Changes
In the 20 years that I have been shooting, I don’t think that I have ever come across a camera where the buttons and switches can inadvertently get bumped or switched, simply by walking along the road with the camera around your neck, or by simple handling of the camera.. I was often having to reset the buttons to where I wanted them, before taking a shot. The absolute worst offender of this is the AGC switch on the side of the camera. Who in their right mind would ever design a switch like this on the side of the camera is beyond me. This thing should be buried several layers deep in a menu setting, if EVER put on a camera at all!
I am not sure how it happened…. I am guessing that one of those times that I was groping around for the switches on the side of the camera, madly trying to switch the Zoom/Ring Rocker switch, I must have accidently switched this wretched thing on. If this has never happened to you, you need to know that the Automatic Gain Control, when switched on, will kick in to gear, even when there is plenty of light, adding so much noise to your shots that they become absolutely useless! As you add ND, it compensates by adding more gain! I had it happen to me a couple of times with the XHA1 on a shoot in Burma, and lost some very valuable footage.
On this shoot in Nepal, I entered into a dimly lit kitchen to shoot a woman cooking the meal. I look at my monitor and I say to myself, “my, my, but that is a lot of noise for +6 DB!” (I have my gain settings set to -6, -3 and +6 for absolute emergency situations in dimly lit rooms like this.) I looked more carefully at the readouts. To my absolute horror I saw the monitor say that it was pushing +22 DB Gain! I was in complete shock, dis-belief and denial. How was it even possible? And then I remembered my experience in Burma. I looked down, and sure enough the AGC switch had somehow been turned on! “How long has that XXXX@@&&!!!!!! thing been on?”, I asked myself. I still haven’t answered that question. I am almost afraid to look at my footage … for fear that it may have been on for a whole day, where shooting outside, it would be very difficult to see the noise on the monitor.
I did check the shots that I had taken just before the dark country kitchen, of the sunrise hitting the Himalayas. It was the one clear day of my whole week in Pokhara. I had managed to get myself to one of the best viewpoints on the right day! I was very pleased with the shots I got….until I checked them out on my computer. They are all full of noise and grain, even though there was plenty of light…. All because of this switch! Beautifully composed shots on a clear, blue sky morning… totally unusable in a project or for stock. This damn switch has cost me hundreds if not thousands of dollars! You can be sure that I will be jamming some black tape into that switch hole, so it can never happen again! Note to Canon, if you are listening…. In the next firmware release for this camera, please put in an option to disable this dastardly switch. And in the next hardware release, just leave it off the camera altogether! Under what scenario would anyone ever want a switch on a camera that makes the footage unusable???
Taking Canon’s Name in Vain
One last thing that I need to warn the new or rental user about, and that is the bizarre switch on this camera that changes whether you are able to zoom with the ring or the rocker. For some inexplicable reason, both modes cannot be active at the same time! You must choose what mode you want to be in and manually flip a switch to move from one to the other! I almost lost my Christian experience as I would time after time miss a shot, because of being in the wrong mode! If not taking God’s name in vain, you can be sure that I was taking Canon’s name in vain a lot, this last couple of weeks. Who came up with this idea? What is it all about? Who, sitting in their engineering room, gathered their committee together to brainstorm improvments to this camera, and said, “I know! Let’s make a switch that deactivates the ring zoom … Yeah! That will be a great new feature!” Have they ever been out on a shoot? Did some weekend enthusiast send Canon an email complaining that every time they go to adjust the focus or aperture, they get the zoom ring instead, and wouldn’t it be nice if that could be disabled with a switch so that you wouldn’t have to worry about that anymore???
Who knows what the story could possibly be behind this switch, but I wish that I could start a petition to get Canon to address this issue with the first Firmware upgrade. Can this post start a petition? We need a menu option to disable this disabler! Sooner than later would be great! Do you really want thousands of guys out there cursing the name of Canon, every time they miss a shot, because they can’t frame it quick enough, because of some crazy switch? As my wife often says to me …. “Do you want to know that?”
The Good News
Well, enough ranting… As I am usually a very positive person, I would like to add what I do like about the camera, so far…. I haven’t yet had a chance to review much of the footage, but for what I have looked at in the field, it does look great, (when you get your exposure right and are not in some High gain mode!)
I am glad I got the camera, and I am sure that I will get the kinks worked out after I spend some more time with it. The things that I like the most about it so far is that it is tapeless, instant review of shots (Albeit with no audio --- What is up with that?), Left and Right monitor, Even slower settings for the rocker zoom then on the XHA1. Now you can creep in so slow on an interview that you hardly notice the pull in. Very nice! Auto focus seems to be very accurate (white balance on my unit does not work as well as the XHA1) The one-touch display info, on or off, along with the record light indicator at the back of the on-board mic, is very helpful, over the XHA1 design. The ability to write to CF cards.
Not enough changes and improvements to justify the $6500++ I know… but hopefully, the image quality, once I get a chance to view it critically on a good monitor, will make up the difference. If it is anything like the footage that they were showing as samples of this camera at NAB last year, then I will be pleased. Viewing that sample footage is what sold me on this camera. I hope my footage comes close to the quality that I saw there…
The LCD monitor
Naïve and trusting as I am, I somehow had faith that for the extra $3500 that I was laying out for this model, over my XHA1’s, that Canon would surely put some of that money towards a monitor that works better for shooting in sunlight. It surely does look better indoors, and I love the way that it can be positioned on either side of the camera, but alas, this monitor is no more useful for determining correct exposure outdoors, then the XHA1. If anything, I find it much worse! Many of the shots of my first couple of days of shooting are badly over exposed… I, know some of you are saying… why didn’t you use the vector scope… I am sure that it is a nice new feature, but not coming from a technical background, it’s just a bunch of squiggly lines to me. I’ll be putting that on my list of things to learn before I head out on the next shoot… But if you are like me and you don’t know how to read the vector scope, and you are headed out on a shoot, just be aware that, under the sun, the monitor is VERY deceiving… The only way that I could get good exposure was to carry a black T-shirt around my neck and use that to drape over the camera to check exposure before every shot.
The On/Off Switch
Much has been written here about the clumsy ON/OFF/Media switch, so I probably don’t need to add much. As it doesn’t affect the quality of the shots, it is an annoyance that I can live with. After about a week of using it, I was able to build up the needed dexterity to successfully turn it to the off position without going to the media mode, almost every time! One thing that I have noticed is that there does not seem to be a battery-saving, auto shut-off after five minutes of non-use, if you leave the camera in the On position. There were several occasions where I pulled the camera out for a quick shot, only to find that I had a dead battery… (He doesn’t like missing shots like that!)
Accidental Button and Switch Changes
In the 20 years that I have been shooting, I don’t think that I have ever come across a camera where the buttons and switches can inadvertently get bumped or switched, simply by walking along the road with the camera around your neck, or by simple handling of the camera.. I was often having to reset the buttons to where I wanted them, before taking a shot. The absolute worst offender of this is the AGC switch on the side of the camera. Who in their right mind would ever design a switch like this on the side of the camera is beyond me. This thing should be buried several layers deep in a menu setting, if EVER put on a camera at all!
I am not sure how it happened…. I am guessing that one of those times that I was groping around for the switches on the side of the camera, madly trying to switch the Zoom/Ring Rocker switch, I must have accidently switched this wretched thing on. If this has never happened to you, you need to know that the Automatic Gain Control, when switched on, will kick in to gear, even when there is plenty of light, adding so much noise to your shots that they become absolutely useless! As you add ND, it compensates by adding more gain! I had it happen to me a couple of times with the XHA1 on a shoot in Burma, and lost some very valuable footage.
On this shoot in Nepal, I entered into a dimly lit kitchen to shoot a woman cooking the meal. I look at my monitor and I say to myself, “my, my, but that is a lot of noise for +6 DB!” (I have my gain settings set to -6, -3 and +6 for absolute emergency situations in dimly lit rooms like this.) I looked more carefully at the readouts. To my absolute horror I saw the monitor say that it was pushing +22 DB Gain! I was in complete shock, dis-belief and denial. How was it even possible? And then I remembered my experience in Burma. I looked down, and sure enough the AGC switch had somehow been turned on! “How long has that XXXX@@&&!!!!!! thing been on?”, I asked myself. I still haven’t answered that question. I am almost afraid to look at my footage … for fear that it may have been on for a whole day, where shooting outside, it would be very difficult to see the noise on the monitor.
I did check the shots that I had taken just before the dark country kitchen, of the sunrise hitting the Himalayas. It was the one clear day of my whole week in Pokhara. I had managed to get myself to one of the best viewpoints on the right day! I was very pleased with the shots I got….until I checked them out on my computer. They are all full of noise and grain, even though there was plenty of light…. All because of this switch! Beautifully composed shots on a clear, blue sky morning… totally unusable in a project or for stock. This damn switch has cost me hundreds if not thousands of dollars! You can be sure that I will be jamming some black tape into that switch hole, so it can never happen again! Note to Canon, if you are listening…. In the next firmware release for this camera, please put in an option to disable this dastardly switch. And in the next hardware release, just leave it off the camera altogether! Under what scenario would anyone ever want a switch on a camera that makes the footage unusable???
Taking Canon’s Name in Vain
One last thing that I need to warn the new or rental user about, and that is the bizarre switch on this camera that changes whether you are able to zoom with the ring or the rocker. For some inexplicable reason, both modes cannot be active at the same time! You must choose what mode you want to be in and manually flip a switch to move from one to the other! I almost lost my Christian experience as I would time after time miss a shot, because of being in the wrong mode! If not taking God’s name in vain, you can be sure that I was taking Canon’s name in vain a lot, this last couple of weeks. Who came up with this idea? What is it all about? Who, sitting in their engineering room, gathered their committee together to brainstorm improvments to this camera, and said, “I know! Let’s make a switch that deactivates the ring zoom … Yeah! That will be a great new feature!” Have they ever been out on a shoot? Did some weekend enthusiast send Canon an email complaining that every time they go to adjust the focus or aperture, they get the zoom ring instead, and wouldn’t it be nice if that could be disabled with a switch so that you wouldn’t have to worry about that anymore???
Who knows what the story could possibly be behind this switch, but I wish that I could start a petition to get Canon to address this issue with the first Firmware upgrade. Can this post start a petition? We need a menu option to disable this disabler! Sooner than later would be great! Do you really want thousands of guys out there cursing the name of Canon, every time they miss a shot, because they can’t frame it quick enough, because of some crazy switch? As my wife often says to me …. “Do you want to know that?”
The Good News
Well, enough ranting… As I am usually a very positive person, I would like to add what I do like about the camera, so far…. I haven’t yet had a chance to review much of the footage, but for what I have looked at in the field, it does look great, (when you get your exposure right and are not in some High gain mode!)
I am glad I got the camera, and I am sure that I will get the kinks worked out after I spend some more time with it. The things that I like the most about it so far is that it is tapeless, instant review of shots (Albeit with no audio --- What is up with that?), Left and Right monitor, Even slower settings for the rocker zoom then on the XHA1. Now you can creep in so slow on an interview that you hardly notice the pull in. Very nice! Auto focus seems to be very accurate (white balance on my unit does not work as well as the XHA1) The one-touch display info, on or off, along with the record light indicator at the back of the on-board mic, is very helpful, over the XHA1 design. The ability to write to CF cards.
Not enough changes and improvements to justify the $6500++ I know… but hopefully, the image quality, once I get a chance to view it critically on a good monitor, will make up the difference. If it is anything like the footage that they were showing as samples of this camera at NAB last year, then I will be pleased. Viewing that sample footage is what sold me on this camera. I hope my footage comes close to the quality that I saw there…