John Reeve
April 6th, 2011, 04:51 AM
I just sent this to support but thought I would post here just in case others are exporting side by side and not sure why the 3D effect is so wrong.
Problem:
"Side by side mode is not working correctly. Yes the picture looks side by side but when the image is stretched by my 3D monitor the horizontal alignment is not correct because the ratios in side by side are wrong. This is hard to detect because the other overlay modes are working correctly. Please use the sample file i sent yesterday for an example. "
Reproduce this problem by:
" Set stereoModeStatus to side by side. Carefully observe the pair of images and you will find that the horizontal parallax values are incorrect making for an over exaggerated 3D picture. Or better yet export that side by side image to a 3D display and with your glasses off you will see the excessive parallax. "
Problem:
"Side by side mode is not working correctly. Yes the picture looks side by side but when the image is stretched by my 3D monitor the horizontal alignment is not correct because the ratios in side by side are wrong. This is hard to detect because the other overlay modes are working correctly. Please use the sample file i sent yesterday for an example. "
Reproduce this problem by:
" Set stereoModeStatus to side by side. Carefully observe the pair of images and you will find that the horizontal parallax values are incorrect making for an over exaggerated 3D picture. Or better yet export that side by side image to a 3D display and with your glasses off you will see the excessive parallax. "