Chris Soucy
April 22nd, 2012, 10:24 PM
Morning, all.
The CB100 Counterbalance Correction System I am co designing with Richard Davidson (whose in Texas) got an outing to NAB last week and many comments were made about it being perfect for flyers.
The first use in anger of an initial prototype was whilst doing my review of the new Vinten Vision blue5 camera support system, announced on DVinfo here: http://www.dvinfo.net/forum/tripod-sticks-heads/506709-new-vinten-vision-blue5-nab.html
The review itself here: Review: Vinten Vision blue5 Video Support System at DVInfo.net (http://www.dvinfo.net/article/production/camsupport/review-vinten-vision-blue5-video-support-system.html)
Now, whilst we got some very good feedback from NAB and have started incorporating that into the next set of prototypes, we need to make sure no stone is left unturned on this, and require any feedback we can get.
Unfortunately, Charles Papert, who was our first choice of reviewer/ technical advice, is jammed past his eye balls for the forseeable future, so we're a bit stuck for flyer input.
[Admission here: neither Richard nor myself, whilst being pretty well on top of tripods and heads, have a clue about flyers, how they work or anything else, so "stumblng around in the the dark" on this]
Sooo, anyone want to list just what their perfect weight system would look like, be able to do, in what size and weight increments and anything else you consider relevant.
BTW, don't take too much notice of the system shown in the photos I attached to the announcement.
That was a MK I prototype, and a lot has changed since then to tidy it up and refine it's operation. Further enhancements are currently taking place.
The floor is open to all comers, suggestions?
Regards,
CS
The CB100 Counterbalance Correction System I am co designing with Richard Davidson (whose in Texas) got an outing to NAB last week and many comments were made about it being perfect for flyers.
The first use in anger of an initial prototype was whilst doing my review of the new Vinten Vision blue5 camera support system, announced on DVinfo here: http://www.dvinfo.net/forum/tripod-sticks-heads/506709-new-vinten-vision-blue5-nab.html
The review itself here: Review: Vinten Vision blue5 Video Support System at DVInfo.net (http://www.dvinfo.net/article/production/camsupport/review-vinten-vision-blue5-video-support-system.html)
Now, whilst we got some very good feedback from NAB and have started incorporating that into the next set of prototypes, we need to make sure no stone is left unturned on this, and require any feedback we can get.
Unfortunately, Charles Papert, who was our first choice of reviewer/ technical advice, is jammed past his eye balls for the forseeable future, so we're a bit stuck for flyer input.
[Admission here: neither Richard nor myself, whilst being pretty well on top of tripods and heads, have a clue about flyers, how they work or anything else, so "stumblng around in the the dark" on this]
Sooo, anyone want to list just what their perfect weight system would look like, be able to do, in what size and weight increments and anything else you consider relevant.
BTW, don't take too much notice of the system shown in the photos I attached to the announcement.
That was a MK I prototype, and a lot has changed since then to tidy it up and refine it's operation. Further enhancements are currently taking place.
The floor is open to all comers, suggestions?
Regards,
CS