Is there any way to get the KiPro Mini to receive a 720 50/60p signal and record it as 720 25/30p slow motion?

Cheers

Joe L. - Sorry, but the Ki Pro Mini does not support "over cranking". Timelapse recording, which is a form of "under cranking", was added recently with the v4.1 firmware update.

I hope this information is helpful,
Jon Thorn
Senior Product Manager
AJA Video Systems

Jon,
Does it mean that when the 1D C is released, the 1080 at 50/60p cannot be recorded as slow motion? So how will that situation be dealt with?
Cheers,
Sabyasachi

Sabyasachi P. - The AJA Ki Pro Mini does not offer support for 1080p 50, 1080p 59.94 or 1080p 60. A list of the various formats and frame rates that are supported by the Ki Pro Mini can be found here:
Ki Pro Mini - AJA Video Systems (http://www.aja.com/en/products/ki-pro-mini/#techspecs)

I hope this information is helpful,
Jon Thorn
Senior Product Manager
AJA Video Systems

thanks Jon, I thought that was the case.

I know this thread is a couple years old, but I wanted to let you know that at least with the Varicam HDC27, the KiPro does do overcrank and full speed ramping. I just posted a thread here explaining how this is done. Maybe the people at AJA didn't know about this?