Is it possible to implement the slate numbers into the metadata or filenames? i requested this before but until now we only have
Clip Number
Reel Number
Scene Number
Take Number
Shooting Day
Camera Number
Project Name

The slate is really important in feature filming. It should be between 'scene' and 'take'
as within a scene jou can have different slates and then an easily accessable slate increase function (like a double tap on a specific area) should reset the take to 001.
In the same scene of the script, you can have different positions/angels and lenses. These are numbered in slates. The takes are always with the same position/angle/lens.
The slates are numbered chronological and will need at least 4 digits.

Per example: you start at day 1 for scene 38. you shoot your master/establishing wide, a medium 2 shot, a face 1 close and overshoulder face 2 close. So you have 4 slates from scene 38 and, depending on the actor/camoperator talent, several takes within each slate.
On top of that, day 1 can be over midnight so the date can differ from shooting day...

I would love to see this function in the new firmware.

Dear Ron,

I will discuss your requests with our engineers.

We automatically increment the Take Number, every time the Odyssey / Camera goes into record.

I assume that we should not automatically increment the Slate Number.

Is it important to you for this new field be placed between the Scene and Take Number?

Respectfully,

thnx for the reply
I think it would be the logical place between scene and take
auto take increase is ok with me. Maybe even better if there was an additional checkbox "auto take increase" (default on)
The slate number should be easy accessible. I let you guys think about the best solution for this. Just not too much clicks and sweaty fingertips to get there...

I also want to suggest an auto file naming function in which the user can choose the buildup (and order) for the filenames
example: <slate>_ <take> (gives 0123_020) or <scene>_<slate>_<cam>_<take> (gives 076_0123_A_020)
important is that the number of digits is the same as in the metadata because the leading zero(s) are needed to get things chronologically organised.

Maybe users can give some feedback on this 2nd idea

Dear Ron,

I discussed your suggestions with our engineers.

Before we came up with this list of metadata, I spoke with many industry professionals.

Please note that our Scene Number field is actually alphanumeric and is 8 characters long.

This allows you to have a Scene Number, plus extra alpha character for the Slate identifier.

Thus, Scene 32 can be Scene 32A.

You can dress this up any way you wish, such as 32-A.

We are also looking into your other suggestion for building the filename.

Respectfully,

Dear Ron,

I discussed your suggestions with our engineers.

Before we came up with this list of metadata, I spoke with many industry professionals.

Please note that our Scene Number field is actually alphanumeric and is 8 characters long.

This allows you to have a Scene Number, plus extra alpha character for the Slate identifier.

Thus, Scene 32 can be Scene 32A.

You can dress this up any way you wish, such as 32-A.

We are also looking into your other suggestion for building the filename.

Respectfully,

Dan, sorry to be a bit annoying.

Apparently you spoke the wrong people or missed one of the most important parameters in logging for movie industry, ask any 1st AD. (At least here in europe)
Look here: Movie&#x2605;Slate > The App (http://www.movie-slate.com/)
As you see in the upper right corner, where one is supposed to start reading: slate number!
It is important to have this as a separate parameter because all parties during moviemaking relate to that number. Additions to the scene number is not an option because this can be reserved to subsequential scenestuff.
For editors slate numbers are more efficient i suppose

So I will hold on to my request...
Aren't there other readers who can back me up here?

Dear Ron,

I feel that the way it is done in Europe may be different.

I checked with many industry experts in New York City, Hollywood, and Burbank, but not Europe, sorry.
I routinely speak with people from all over the world.

And I just checked with another expert, and Slate Number is not in common use in the United States.


Of course, we attempt to design equipment that is useful world-wide.

I just checked all of the manual and electronic slates on B&H's website, and I found only one, that had Slate Number.

The one I found had Scene, Slate, Take

Most have Roll, Scene, Take.

We have a field named Reel but it can be used for any four digit alphanumeric value, included Roll or Slate Number.

Our fields are:

Clip

Reel

Scene

Take

Day (Shooting Day) (We automatically record the Month, Day, Year, and starting Time of the clip.

Camera

Project


Ron, are you using our Reel field? Could you use this for your Slate Number?

Respectfully,

Hello Ron,
Here in the states, my personal experience was that the only time we used slate #s was on documentary shooting where we didn't assign scene #s.
It may well be different in Europe, but for the last couple of episodic TV series as well as features I've shot, the script person would give the assistant a scene # which would be (as Dan indicated) a combination of the actual scene number and an incrementing letter that would change for each setup. Thus scene 32 on the slate would be the first setup, followed by 32A, 32B, 32C, etc. When you run out of single letters, the cycle continues with 32AA, 32AB, etc. Obviously these are combined with the take number when creating the selects list. The script person would use these combination scene #s in creating their line script for the editor.
Of course to avoid confusion, added scenes would use a letter before the scene number - so an added scene might be A32 -- thus the setups would be A32, A32A, A32B, etc.
The issue with adding one more thing to change every take is that it becomes one more thing for the assistant to deal with - even if it only takes a few seconds each time - and one more thing to go out of sequence when the Director/AD are yelling 'let's roll, let's roll' while the assistant is busy taking revised focus measurements. Now if there were an easy way for the script supervisor to input all the data remotely over bluetooth....

I think it is an european thing. Slate is commonly used here. Since in digital age you don't have physical reels, this is an unused field. However there might be accompaning software that could be using the reel field for identifying purposes, and things could get confusing.
Sure i can use the reel field for slate numbers.
Conveniant would be to have a preferences function that just changes the name of this field to 'take'
Maybe when this is functional add a "-" and "+" symbol box in the menu where changes in metadata are made or even a faster shortcut (f-buttons?)
Is it possible to have larger buttons (you must be concentrated to hit the small areas and moistures fingers can sometimes cause misalignment)

Sure i can use the reel field for slate numbers.
Conveniant would be to have a preferences function that just changes the name of this field to 'take'


Dear Ron,

I am confused. Did you mean "Slate" instead of "Take" in your post?

My best guess is that you wanted to change the "Reel" field to "Slate".


Background:

Our Scene Number and Take Fields are related and work together.

If you change the Scene Number, we automatically reset the Take Number to 001.

After each clip that the unit records, the Take Number is incremented automatically by 1.

And if you want to change the Take Number manually, we have a way to increment or decrease the Take Number using Up and Down buttons.
But since this is done automatically these are not normally used.


Maybe when this is functional add a "-" and "+" symbol box in the menu where changes in metadata are made or even a faster shortcut (f-buttons?)

For the fields that are numeric only, we have the "+" and "-" buttons, but for the alphanumeric fields, we have a keyboard layout and do not currently have the "+" and "-" buttons.

Are you requesting that we add these "+" and "-" buttons to our current Reel Number or a different field?

Is it possible to have larger buttons (you must be concentrated to hit the small areas and moistures fingers can sometimes cause misalignment)

Yes, we can improve this.

Respectfully,

Sorry Dan, I ment 'slate' in stead of 'take'. Must be very confusing, my mistake. I shall be more accurate.
The point is that in "European style" (I started to call it this way) we need the take-field to reset when the slate-field increases. That won't happen if I use the reel-field.
Here's a suggestion: in the preferences a choise of metadata style => european or documantary or hollywood... Have to think about the names. What do they do in Asia?