Hi all,

My trusty C100 will no longer connect to my Ninja 2.

I tried with a mate’s C100 with the same result.

I changed the HDMI cables 3 times. Same result.

The Ninja 2 continued to claim that there was ‘No Signal’.

Strange, it was working last week and no menu changes have been made at all.

I plugged the C100 into an external monitor and then a smart TV - all was well. A good, clean picture, the HDMI connections were all snug and jiggling them did not reveal any loose connections or result in any picture breakup.

I then plugged my 5DMK4 into the Ninja 2 and the video image appeared immediately. Again, a good, clear picture and no issues when the HDMI connectors were jiggled about. We tried a second DSLR and that worked well too.

So, the Ninja 2 has refused to work with 2 different C100 cameras but works quite happily with a Canon 5DMK4.

Any ideas would be very welcome.

Cheers!
_________________________________________

C100 menu settings:

OTHER FUNCTIONS > HDMI – TIME CODE > ON

REC COMMAND > ON

VIDEO SETUP > CHARACTER DISPLAY > EXT OUT

HD ONSCREEN DISPLAY > ON