View Full Version : More "After Dawn" XL H1 Dolly Footage


Jack Foley
February 7th, 2006, 07:50 AM
As requested by Michael Pappas, some more footage of our after dawn shot. Before complaining about the shots being too dark, please read my previous post. I have much more but the rest is too big to post.

Hunt for the bad guy.
http://fabforce.net/various/DollyChrisClemensHuntStefan3.m2t (58 MB)

Close up shooting.
http://fabforce.net/various/DollyChrisClemensShooting.m2t (33 MB)

Chris giving commands.
http://fabforce.net/various/DollyChrisCommand.m2t (18 MB)

Chris shooting.
http://fabforce.net/various/DollyChrisShooting.m2t (19 MB)


The files from yesterday again so everything is on one post.

The sun is down.
http://fabforce.net/various/ViennaSunSet.m2t (26 MB)

One last patrol.
http://fabforce.net/various/DollyChrisClemensPatrol.m2t (42 MB)

Dam* terrorists, take this!
http://fabforce.net/various/DollyChrisFollow2.m2t (23 MB)

Alike shot from the side.
http://fabforce.net/various/DollyChrisFollowSide.m2t (28 MB)

Enjoy.

Barlow Elton
February 7th, 2006, 11:08 AM
Is this the high-def sequel to 28 days later? The virus has spread to Europe!!

Thanks for sharing those clips, they look pretty good given the conditions. Looks like you had some fun too.

Baldo Lopez
February 7th, 2006, 12:13 PM
Is this HDV what we are seeing?

Eli R Cantu
February 7th, 2006, 03:50 PM
Actually I have a few questions.

1) What mode was this shot in. DV-HDV 720 24p/25p/30p
2) Was the stock lens was used.
3) Is there any picture settings used or is this settings out of the box.

Thanks guys, great stuff

Jack Foley
February 7th, 2006, 05:09 PM
> 1) What mode was this shot in. DV-HDV 720 24p/25p/30p

It was shot with the 25F mode of a European XL H1, that means 1080p. But it looks much better when played back at 720p.

> 2) Was the stock lens was used.

Yes. And this was one of the major pains (apart from the lo-res viewfinder). One should definitly get the manual lense or a G35.

> 3) Is there any picture settings used or is this settings out of the box.

Yes, I used -3 db, [GAM] Cine 2, [KNE] low, [BLK] PRESS. Other settings were [PED] -1, [SET] -1 i think.

And ND filter was on 1/6 in almost all shots. The display was much too bright so I did not realize that it was actually that dark.

Eli R Cantu
February 7th, 2006, 06:32 PM
Thanks Jack, whatever your shooting for, I certainly would want to see it.


The one question I forgot to ask is what editor your using to cut the m2t. files and has it giv'n any problems using the 24p

Jack Foley
February 7th, 2006, 09:27 PM
> Thanks Jack, whatever your shooting for, I certainly would want to see it.

It was actually just one of the tests shots we did over the weekend because Canon was so nice to lend us a XL H1 to test. We do not have any real plans yet... ;)


> The one question I forgot to ask is what editor your using to cut the m2t. files and has it giv'n any problems using the 24p

Premiere Pro 2.0 has a much improved .m2t file handling, I get nearly realtime conversion to 720p on my old 2.4GHz box. It is much faster than in Vegas.

But for cutting there is nothing that can beat Cineform on HDV (used their 15 days demo). Then, either PP2.0 or Vegas. I'm a Vegas fan, but the new Dynamic Link stuff between PP2.0 and After Effects 7.0 is very tempting: No more temporary renders.

24p / 25p is no problem for these tools.

I did not even dare to try on my 1GHz Powerbook because I've heard that the HDV support in Final Cut Pro is not so good. But I can test it tomorrow.

Michael Pappas
February 8th, 2006, 02:27 AM
Thank You Jack! :-)

Andy Lunn
May 4th, 2007, 04:47 PM
Please sort your old posts out, its so frustrating when people remove there movies and leave the topics open :(

Steven Dempsey
May 5th, 2007, 06:56 AM
Andy, as mentioned to you on another board and with all due respect, your expectations that footage will still be available to download a year and a half later are unreasonable. It is not customary for contributors to close a topic because it just sort of naturally fades away to the bottom of the list.

I would suggest you contact the contributor directly instead of reviving an old thread that has broken links.