View Full Version : Download the HV10, HV20 operator's manuals (links)


Chris Hurd
September 13th, 2006, 02:39 PM
Here's a link to the Canon HV10 owner's manual in PDF format:

http://www.usa.canon.com/consumer/controller?act=DownloadDetailAct&fcategoryid=326&modelid=14059

Thanks to Ursula Badertscher and Terry Kineda for pointing it out in the first place!

And here's a link to the Canon HV20 owner's manual in PDF format:

http://www.usa.canon.com/consumer/controller?act=DownloadDetailAct&fcategoryid=326&modelid=14869

Thanks to Luis A. Diaz who pointed it out below in this thread.

Lou Bruno
September 16th, 2006, 06:13 PM
Chris,

For those of us with extra firewall and pop-up protection, could you please set the sticky as a direct PDF file? Thanks

LOU BRUNO

Jack Zhang
September 16th, 2006, 06:26 PM
Unforutnatly, Canon's server has authentication stuff to prevent direct linking.

Chris Hurd
September 16th, 2006, 09:23 PM
Nobody can host it anywhere else. That document is Canon's intellectual property which is protected by strict copyright law. If someone is foolish enough to attempt to re-distribute it on another server, they're just asking for litigation. I will not allow such links to be posted here anyway.

A couple of mouse clicks and a temporary override of firewalls, etc. will get you the download direct from Canon USA.

Cody Lucido
September 20th, 2006, 09:05 AM
I have tried on many different computers and cannot get this darn manual!!! Canon really needs to work on their cruddy website.

Colin Gould
September 20th, 2006, 11:14 AM
You need to enable popups, to download it.

Check Amazon.. nope, manual isn't submitted yet.

Luis A. Diaz
February 21st, 2007, 05:22 PM
To all:
Canon has released for download the Instruction Manual for the HV-20
available at the support site: http:///www.usa.canon.com/consumer/controller?act=DownloadDetailAct&fcategoryid=326&modelid=14869

I have not seen this posted anywhere, but for those who are interested I just got a copy in pdf.

Thanks
Luis

Matt Buys
February 22nd, 2007, 11:11 AM
Just ordered mine. I went with the Hoya filter package. But I also need a good protective filter because I'll be shooting in a lot of nasty conditions. Any recommendations? Also, is there a waterproof housing for it yet?

Chris Hurd
February 22nd, 2007, 11:17 AM
Thanks a bunch for this link, Luis... I'm merging your post with our "sticky" thread for the manuals.

Mike Horrigan
February 22nd, 2007, 11:33 AM
Awesome! Thanks for this...

Should help to fill in some of the gap/wait.

Mike

Luis A. Diaz
February 22nd, 2007, 01:59 PM
Thanks a bunch for this link, Luis... I'm merging your post with our "sticky" thread for the manuals.

Thanks Chris, with so many of us being anxiously waiting for the HV-20, I thought the manual will keep us busy until April. I for one, could not get an answer as to where the sensor for the remote was located until I read the manual as opposed to the HV-10.

I'm sure lot of questions will start streaming down now.

Luis

Mike Horrigan
February 22nd, 2007, 02:10 PM
If the remote came with a FOCUS option this thing would have been perfect! (Since there is no focus ring.)

Oh well, it's still a great little camera. I can't wait to get it!

Dave Blackhurst
February 22nd, 2007, 03:50 PM
Hi Chris and all -

I too couldn't get the download link to work and I'm a geek... but since that is what it is, I resolved the link back to the actual file on the server...

http://downloads.canon.com/cpr/software/video/HV20_manual.pdf

I don't know how to turn the above link active (little help Chris?), but you can cut and paste and bypass all the popups and weirdness (I kept getting a message that the site wanted to close the window... yes or no... neither option got me anywhere!

I'm a Sony guy, but the footage I've seen from the HV10 has me interested - got to see what the 20 has to offer - now to find time to read the HC7 and HV20 manuals and figure out to buy one, both or what?!

DB>)

PS - Chris - seems like you're getting so much traffic the servers are acting up a bit - getting errors out here and pages won't display or are really delayed - time to add an extra hamster or two? Go for one of those quadcore gerbils maybe?

Dave Blackhurst
February 22nd, 2007, 03:51 PM
Hi Chris and all -


***** sorry about the multiple postings - the server hiccups and reports the page can't display, but apparently the upoad went through the first time...

and I see that the link automatically goes live when I post, now that's nifty! *****

DB>)

Mike Horrigan
February 22nd, 2007, 04:09 PM
I don't know how to turn the above link active (little help Chris?), but you can cut and paste and bypass all the popups and weirdness (I kept getting a message that the site wanted to close the window... yes or no... neither option got me anywhere!
I had the same problem. Turned off the pop-up blocker on my browser and the original link worked like a charm.

Mike

Dave Blackhurst
February 22nd, 2007, 04:58 PM
I just tried the link I posted, and now it denies access... VERY odd, so apparently you have to let the popups (I never got any actual popups) do their thing and THEN try to get the file by entering the direct link.... Oh well, at least I got it... what a strange setup they have on their servers...

DB>)

Rich Sanchez
March 5th, 2007, 08:46 AM
I too couldn't get the download link to work and I'm a geek... but since that is what it is, I resolved the link back to the actual file on the server...Thanks! That worked!I could not get it in the normal fashion on my two systems. It seems to be specific to that download as I have no problems with other downloads.


Rich

Marty Hudzik
March 28th, 2007, 11:39 AM
Nevermind.

Colin McDonald
April 25th, 2008, 02:06 PM
Just downloaded this from:

http://support-asia.canon-asia.com/contents/ASIA/EN/0300088501.html

I think this is quite recently added to the Canon Asia site - I've been checking from time to time.

Apologies if it has already been posted and I missed it.

Hans Sandstrom
January 9th, 2010, 09:08 AM
Thanks for the link.

I'm learning every day by using this forum and the Apple FCE forum.

Check out my first videos here:


Hans Sandström's videos on Vimeo (http://www.vimeo.com/user1155500/videos)