View Full Version : Device to allow tape changes on A1


Jason Donaldson
July 8th, 2007, 06:16 PM
I'm not sure if it was on this forum or not that I read about it, but I am looking for a device that will allow me to switch tapes while my A1 is bolted onto anything (glidecam, tri and monopod etc)

I followed the link to this guys website and he sells them for something like 24.95, but lost the link


Any help would be appreciated

Karl Heiner
July 8th, 2007, 07:52 PM
hello jason,

know what you are talking about, but can't remember the link either.
was a machined u shaped alu block. with 1/4 to camcorder and 1/4 threat from tripod plate.

had a small sony trv 730 for years, tape drive broke finally, the only bad part on that camcorder was the bottom load.

Jason Donaldson
July 8th, 2007, 08:02 PM
I wouldn't even know what to search for in google...what would that thing be called?

Min Lee
July 8th, 2007, 08:12 PM
here's two

http://dm-accessories.com/

http://www.bhphotovideo.com/c/product/442507-REG/Cavision_RPSHC_RPSHC_Spacer_for_Smaller.html

Karl Heiner
July 8th, 2007, 08:16 PM
I wouldn't even know what to search for in google...what would that thing be called?


try u-bracket-camcorder/ camera accessories or 1/4 bracket..etc

Jason Donaldson
July 8th, 2007, 09:44 PM
here's two

http://dm-accessories.com/

http://www.bhphotovideo.com/c/product/442507-REG/Cavision_RPSHC_RPSHC_Spacer_for_Smaller.html

Thanks Min, found the one I was looking for at B&H

Thanks everyone else as well.