DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon GL Series DV Camcorders (https://www.dvinfo.net/forum/canon-gl-series-dv-camcorders/)
-   -   Confusing the LCD (https://www.dvinfo.net/forum/canon-gl-series-dv-camcorders/34351-confusing-lcd.html)

Maxi Zenk November 2nd, 2004 09:32 AM

Confusing the LCD
 
Hello everyone!

Only a short question:

Is there any possibility to make my GL 2 think the display is flipped 180° without having it flipped? (the picure shall appear upsidedown, and be mirrored... )
I saw a picture on the internet, a guy did this with his Sony PD100A and ... nails ...

"The nail attached to two blocks of plastic is depressing a little internal switch which makes the monitor flip its image."

Has anybody got an idea how I can achieve this with my GL2 ?

Thanks a lot,
Maxi.

Cosmin Rotaru November 2nd, 2004 10:47 AM

The GL2/XM2 has a litle magnet on the camera under the LCD hinge. There's a senzor on the LCD, above the hinge.
The litle magnet can be removed - it is under a small covering. I removed it and placed it near the senzor on the LCD and that turned the image while the LCD was in the normal position.
Others taped a litle magnet on the LCD, at the senzor area.
You're probably trying a mini35 DIY? :)

Maxi Zenk November 2nd, 2004 03:48 PM

Hey Cosmin!

What you said is fact, it's for a mini35 :)

Thank you very much for your hint, I'll have a try wirg a 2nd magnet tomorrow.
Removing the magnet makes my gurantee invalid, right?

Thanks,
Maxi.

Cosmin Rotaru November 3rd, 2004 10:34 AM

"Removing the magnet makes my gurantee invalid, right?"

I can't see any seal in there... I put it back and you can't tell its been off.


All times are GMT -6. The time now is 08:07 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network