DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon VIXIA Series AVCHD and HDV Camcorders (https://www.dvinfo.net/forum/canon-vixia-series-avchd-hdv-camcorders/)
-   -   No Sound Using HV20's Component Output But... (https://www.dvinfo.net/forum/canon-vixia-series-avchd-hdv-camcorders/181302-no-sound-using-hv20s-component-output-but.html)

Jaime M. Prater April 10th, 2009 08:15 AM

No Sound Using HV20's Component Output But...
 
There is sound when I use the A/V Output. Any one know why this would happen?

Chris Barcellos April 10th, 2009 09:14 AM

Not sure if you are saying you are getting video out, but no audio to accompany.

1. The yellow output is switchable between headphones out and A/V out, in the menu system. If you are trying to hear headphones, you need to go into menu and switch that function.

2. You need to be sure you are using the Camera's cable. Other cables will sometimes not be compatible.

3. You may not get audio out if you are using HDMI cable to monitor video. Check your book for that.

Alan Craven April 10th, 2009 11:54 PM

The Component output signal is video only. You need to use the audio output from the A/V lead alongside it to get the accompanying audio.

This is covered on pages 65 and 66 of the PAL version manual for the HV30, in a section headed "Connecting to a TV or VCR". I am sure your HV20 manual will have the same section in its manual.


All times are GMT -6. The time now is 08:49 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2020 The Digital Video Information Network