DV Info Net
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XH Series HDV Camcorders (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/)
-   -   PAL Upgrade for NTSC Camera - Tech Question (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/114571-pal-upgrade-ntsc-camera-tech-question.html)

Hubert Duijzer February 28th, 2008 02:38 PM
Quote:
Originally Posted by Chris Hurd (Post 825760)
There is *some* crossover between shutter speeds, but you can't get 1/50 in 60i nor should you want to. There is 1/48 available in 24F mode though. 1/50 is available only in 50i or 25F mode. Likewise, when shooting 50i, there is no 1/60 or 1/30, nor should there be.
XHA1 PAL can shoot 50i with 1/60 shutterspeed. Strange but true.
My trusty VX2100 did the same thing. Because of that i always thought NTSC did 1/50th also.
1/30 isn't possible, but 1/90 and 120 is....

Urban Skargren June 23rd, 2008 03:33 AM
With my PAL XH-A1 I can choose both 1/50 and 1/60 shutter speeds in all the 50i and 25F modes (HDV, SD16:9 and SD4:3), when set to 'M' mode (manual). In the 'Tv' mode, 1/60 is not available.

Will these two shutter speeds still be available in 50i when upgraded to PAL/NTSC? According to the previous posts they will not be available when an upgraded camera is set to NTSC 60i.

Another question is if the flickering will be seen on the camera display when shooting?


All times are GMT -6. The time now is 04:43 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network