DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XH Series HDV Camcorders (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/)
-   -   Safety Zone settings needed (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/128785-safety-zone-settings-needed.html)

Greg Clark August 26th, 2008 05:18 PM

Safety Zone settings needed
I have found that the LCD screen is not very forgiving and needs safety zone settings so you don't cut off important video. What safety zone settings 80 or 90 percent are being used?

Bill Pryor August 26th, 2008 06:43 PM

Actually the LCD crops in from the left and right but only a tiny bit from top and bottom. It would better if you could see the entire image in underscan, but that's the way it is.

Tripp Woelfel August 26th, 2008 06:54 PM

Depends upon what you want. I leave the 80% guide on and if I stay inside the bounds, I'm good.

I think what you really want to know is whether the guides are accurate. They seem to be but I've never tested them.

All times are GMT -6. The time now is 11:40 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2020 The Digital Video Information Network