Pal - NTSC conversion
 

Has anyone in the UK had their Canon XH A1 firmware/hardware converted to shoot in NTSC, if so does it work, how much was it and where did you get it done.

Hi Vincent.................
 

1. Most probably.

2. Yes.

3. Don't know, ask Canon

4. Here:

Canon (UK) RCC
Projectors, Professional Camera, Lens, Digital Video, Webcameras, Scanner, Binoculars, Professional Lens, Flash, Analogue Compact Camera, Analogue SLR Camera, Digital SLR Camera

(Note: Video - including HD models; Scanners - only dedicated 35mm Slide Film Scanners {2700F, FS2710 & the FS4000 models})

Unit 130 Centennial Park
Centennial Avenue
Elstree Hill South
Borehamwood
Elstree
Hertfordshire
WD6 3SE

Tel: 0844 369 0100
Fax: 0844 892 0849

Web: Canon UK - Home



Any help?


CS

Thank you, I will get in touch with Canon

bear in mind that you can pickup a used ntsc A1 for approx £1400.

Ian
Festival Video and Audio Previews - Festival Previews Ltd

Thanks Ian,

The reason I posted this question is because I was in the middle of an NTSC shoot (using my Sony PMW EX3) and the tripod collapsed. The camera hit the deck and lens is a total write off. I need to get the NTSC DVD project completed asap. The Canon will be away for about 10 days, which is too long for me, and I also want to continue shooting tapeless.

I have purchased a new lens for the Sony (£1050) and should be able to continue shooting on Wednesday. I will save the Canon for other PAL work

Thanks for your help

They charge $600 AUD for the conversion here in Oz...

Pretty steep for a software upgrade I reckon

J