DV Info Net
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XH Series HDV Camcorders (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/)
-   -   canon XH A1s (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/532482-canon-xh-a1s.html)

David Stembridge January 20th, 2017 04:29 PM
Re: canon XH A1s
 
Quote:
Originally Posted by George Dean (Post 1924514)
This is a bit off topic.....I have been using an XLH1 for the past two years recording to a Atomos Samurai Blade using tape as backup. I have never been disappointed in the results (with adequate lighting). Recently I have been using a GH4 and find the XLH1 holds up to the GH4 HD 8 bit when letting the GH4 reduce from 4K to 1080p. If I record in 4K and then down it to 1080p in Vegas/Resolve, the XLH1 footage falls a bit short. I agree the XL and XH are great cameras that can hold their own within their capabilities.
Just curious, were you using the component out, or SDI to run into your Blade?

David Stembridge January 20th, 2017 04:35 PM
Re: canon XH A1s
 
I still have (2) XHA1s cameras, mainly for use at performances, and weddings. Have looked at the XA25 as a replacement after trying one via CPS and realized that the AF on those is rather zippy compared to my XHA1s. I mostly use my 7D Mark II for promotional work, and everything except the ceremony when doing weddings.

For performance work, we run a firewire line into our MacBook Pros, and capture via QuickTime. Have done this for the past 4 years with no problems.

I recently tried using my BlackMagic Intensity Shuttle Thunderbolt, going from the component out, and it works great. I can record ProRes LT now, and it has 4:2:2 color as well.

I do hope to upgrade at least one of these this year. Will be trying out the XF200 this summer. Good to see a recommendation!

George Dean January 20th, 2017 05:41 PM
Re: canon XH A1s
 
Quote:
Originally Posted by David Stembridge (Post 1926679)
Just curious, were you using the component out, or SDI to run into your Blade?
Hi David,

I use the HD-SDI out of the XLH-1 to feed the SDI in of the Samurai Blade. This provides 4:2:2 8 bit 1920x1080 HD. The component out, as I understand it, will only send out 1440x1080 HDV.

David Stembridge January 21st, 2017 11:14 AM
Re: canon XH A1s
 
Quote:
Originally Posted by George Dean (Post 1926681)
Hi David,

I use the HD-SDI out of the XLH-1 to feed the SDI in of the Samurai Blade. This provides 4:2:2 8 bit 1920x1080 HD. The component out, as I understand it, will only send out 1440x1080 HDV.
Thanks George, Unfortunately, my XHA1s doesn't have the SDI output. I believe my component out gives me full uncompressed HD with 4:2:2 though. Tests are looking great so far. Still have to go into my MBP via the intensity shuttle for thunderbolt; but that works for performance work.

Apparently Canon will still service them (paid) through May 2018. They don't do basic clean checks for free (under CPS) anymore. Roughly $120 after CPS discount.

Dale Guthormsen February 18th, 2017 10:49 AM
Re: canon XH A1s
 
I love my xlh1a

Id like to use a ninja assasin to shoot slow motion frame rates. no hdmi however. is there a way to connect it up??? also pro res 422 would be an asset too plus the higher bit rate.

any ideas?

Gary Huff February 22nd, 2017 04:16 PM
Re: canon XH A1s
 
Quote:
Originally Posted by Dale Guthormsen (Post 1927937)
Id like to use a ninja assasin to shoot slow motion frame rates.
The camera only supports 60i, 30p, and 24p. What slow motion frame rates do you want to shoot?


All times are GMT -6. The time now is 12:39 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network