DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XH Series HDV Camcorders (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/)
-   -   Audio Question (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/78952-audio-question.html)

Lou Bruno November 5th, 2006 07:27 PM

Audio Question
 
My camera will arrive by weeks end. I always review the manual prior to a purchase of a camera. The manual is not clear to me in regards to audio channel operation.


Can I place a shotgun on Channel #1 and a Wireless Mic. on Channel# 2 or do I have to reconfigure same like my XL-2? I do understand that the on-board mic. is seperate and the XLR menu must be activated.

Thanks,
LOU

Chris Hurd November 5th, 2006 08:34 PM

Yes you can... your only challenge is where to put the wireless receiver. Shoe mount? Bracket 1?

Chuck Fadely November 6th, 2006 08:11 AM

The XHA1 comes out of the box set for the built-in microphone. You have to go into a menu to change it to the xlr input.

Once you've done that, there's a actual physical switch near the xlr inputs to either feed channel 1 into both channels or split channel 1 and channel 2.

There are also switches for phantom power, attenuation, and line-in (affects both channels.)

The Bracket1 bracket fits on the XHA1 fine to hold your wireless.

chuck

Lou Bruno November 6th, 2006 10:12 PM

Thanks guys...................

Quote:

Originally Posted by Chuck Fadely
The XHA1 comes out of the box set for the built-in microphone. You have to go into a menu to change it to the xlr input.

Once you've done that, there's a actual physical switch near the xlr inputs to either feed channel 1 into both channels or split channel 1 and channel 2.

There are also switches for phantom power, attenuation, and line-in (affects both channels.)

The Bracket1 bracket fits on the XHA1 fine to hold your wireless.

chuck



All times are GMT -6. The time now is 12:22 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network