Dear Paul,

I did not have my nanoFlash handy when I wrote that.

I just mean set the Bit Rate to 160.

So, you ran Test 1 and it accepted and used 160 with the SanDisk Extreme III card.

I am assuming that you are using a 32 GB card.

I will check with our engineers.

In any case, I recommend that you use 140 Mbps instead of 160 Mbps for the Extreme III cards.

Yes, please just run the test, if and when you have time.

Yes Bit Rate was set to 160 and it accepted it. But it records at 140. Correct Extreme III 32 GB cards.

Will try and do the test when I get out of my office on this beautiful day.