DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Convergent Design Odyssey (https://www.dvinfo.net/forum/convergent-design-odyssey/)
-   -   Battery System for NanoFlash (https://www.dvinfo.net/forum/convergent-design-odyssey/415819-battery-system-nanoflash.html)

Bob Griffiths September 19th, 2009 10:15 AM

Battery System for NanoFlash
 
Hi all:

I've been using Nebtek battery adaptors for my Wolf Seeberg/Nebtek video assist system for about a year and I'm thrilled with how it works. I'm wondering if a Hirose adapted version of the same system might work as well with the NanoFlash or even the XDR. See it here: Nebtek: Product Detail

It converts 7.2v to 12v... which seems unnecessary with the Nano but I am unaware of any disadvantage to that. I am also unaware of a plain Sony L battery holder with a pigtail that could have a Hirose mounted on it.

Thoughts?

Thanks!

Dan Keaton September 19th, 2009 10:19 AM

Dear Bob,

The NEBTEK battery adapters can be modifed to provide a 4-Pin Female Hirose connector for the nanoFlash.

We are building our own L-Series battery cradle for the nanoFlash.

The power requirements of the Flash XDR are higher, over 13 watts.

I do not know, at this time, if the NEBTEK adapter can provide that much power.

A standard 7.2 to 8.4 Volt battery is more efficient, for our recorders, than higher voltages.

Bob Griffiths September 21st, 2009 04:30 PM

Quote:

Originally Posted by Dan Keaton (Post 1372881)
The power requirements of the Flash XDR are higher, over 13 watts.I do not know, at this time, if the NEBTEK adapter can provide that much power.

they rate draw at 1.2 amps if i remember correctly.

I will wait for your L series sled. Timeframe?

Thanks, Dan! Closer & closer to buying... I need to get a major job done first.


All times are GMT -6. The time now is 07:30 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2019 The Digital Video Information Network